nXDS6iR 100 - 127 V, 200 - 240 V, 1ph 50 - 60 Hz: Top Choice in Kuala Lumpur (KL), Malaysia, Selangor, Sri Petaling Glovac Sdn Bhd

Description

Overview:
With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features, the nXDS dry scroll pump is the best performing pump in its class.

nXDS improves on the original XDS pump technology by offering increased pumping speeds, combined with lower ultimate pressures, low power consumption and reduced noise. The gas ballast allows for pumping of condensable vapours, including water, solvents, dilute acids and bases. nXDS pumps feature the very latest in tip seal technology, giving a significantly longer life between tip seal changes.

nXDS-C has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications involving corrosive substances. This chemically resistant version is fitted with Chemraz® internal valves and stainless steel fittings.

nXDS-R has the gas ballast blanked off so it cannot be accidently opened. This is useful for applications such as rare gas recirculation or gas recovery.

Features & Benefits:
Lubricant-free within the vacuum envelope and hermetically sealed means a totally clean and dry vacuum to prevent cross contamination.

Advanced scroll-form and tip-seal technologies deliver best‑in-class vacuum performance and unrivalled ultimate vacuum levels.

Unique tip seal design significantly reduces wear to minimise maintenance and extend service life.

Quiet operation with typical noise during operation < 52 dB(A) for minimal environmental impact.

Advanced interface providing a variety of traditional and analogue and digital control methods enabling remote control/monitoring via RS232 or RS485.

Integrated inverter drive with auto sensing input delivers optimised pumping performance globally.
Pump range includes 6, 10, 15 and 20 m3h-1

Technical Data:

Nominal rotational speed	1800 rpm
Displacement	6.2 m3h-1 / 3.6 ft3min-1
Peak pumping speed	6.2 m3h-1 / 3.6 ft3min-1
Ultimate vacuum (total pressure)	0.020 mbar / 0.015 Torr
Minimum standby rotational speed	1200 rpm
Speed control resolution (percentage of full rotation speed)	1%
Pumping speed at minimum rotational speed	4.1
Maximum continuous inlet pressure	200 mbar
Motor power 1-ph	260 W
Power connector 1-ph	IEC EN60320 C13
Recommended fuse	10A, 250Vac rms
Weight	26.2 kg / 58 lb
Inlet flange	NW25
Exhaust flange	NW25
Noise level	52 dB(A)
Vibration at inlet flange	< 4.5 mms-1 (rms)
Leak tightness (static)	< 1x10-6 mbar ls-1
Operating temperature range	10 to 40 °C / 41 to 104 °F

More detail about Glovac Sdn Bhd