Diffstak 63/150P, 230-250V, 1-ph, 50/60Hz

Diffstak 63/150P, 230-250V, 1-ph, 50/60Hz

Category: Standard Diffstak 63/150P Vapour Pump Available
For more information, visit our official website at glovac.com.my

Description

Overview


The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation.

The Edwards Diffstak 63 (ISO 63 inlet) design has been proven over many years with thousands of pumps installed.

This pump has a pneumatically actuated high vacuum isolation valve and is supplied with: NW10 elbow, NW10 centering-ring, NW10 clamp, water pipe couplings and ferrules, inlet ISO 63 Co-Seal.

Technical Data

Pumping speed  
nitrogen 135 l s-1
hydrogen 200 l s-1
Min backing pump displacement* 5 m3h-1
Recommended backing pump RV5
Recommended fluid Santovac® 5
Fluid charge (dry) 60 ml
Inlet connection compatible with ISO63
Backing connection NW10
Cooling water connection 6 mm compression fittings
Heater power 0.45 kW
Min cooling-water flow at 20°C 42 l h-1
Pneumatic connections 6 mm coupling x ¼” BSP male stud
Pneumatic actuating pressure  
Minimum 2.4 bar / 35 psi
Maximum 6.9 bar / 100 psi
Weight 9 kg

* For maximum throughput. For applications where maximum throughput is not required, use an RV3.

More detail about Glovac Sdn Bhd
Glovac Sdn Bhd
Glovac Sdn Bhd EDWARDS:: Industrial Pump Kuala Lumpur (KL), Chemical Pump Supplier Selangor, Industrial Vacuum Distributor Malaysia ~ Glovac Sdn Bhd
Contact Us flagMalaysia