Diffstak 250/2000P, 230-250 V, 1Ø, 50/60 Hz

Diffstak 250/2000P, 230-250 V, 1Ø, 50/60 Hz

Category: Standard Diffstak 250/2000P Vapour Pump Available
For more information, visit our official website at glovac.com.my

Description

Overview

The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation.

The Edwards Diffstak 250 (ISO250 inlet) design has been proven over many years with thousands of pumps installed. 

This pump has a pneumatically actuated high vacuum isolation valve and is supplied with: NW40 elbow, NW40 centering-ring, NW40 clamp, water pipe couplings and ferrules, inlet ISO 250 trapped ‘O’ ring.

Technical Data

Pumping speed  
nitrogen 2000 l s-1
hydrogen 3000 l s-1
Min backing pump displacement* 40 m3h-1
Recommended backing pump E2M40
Recommended fluid Santovac® 5
Fluid charge (dry) 500 ml
Inlet connection compatible with ISO250
Backing connection NW40
Cooling water connection 10 mm compression fittings
Heater power 2.25 kW
Min cooling-water flow at 20°C 180 l h-1
Pneumatic connections 6mm coupling x ¼ BSP male stud
Pneumatic actuating pressure  
Minimum 2.4bar / 35psi
Maximum 6.9bar / 100psi
Weight  
250/2000M 59kg
250/2000P 60kg

* For maximum throughput
250/2000P only

More detail about Glovac Sdn Bhd
Glovac Sdn Bhd
Glovac Sdn Bhd EDWARDS:: Industrial Pump Kuala Lumpur (KL), Chemical Pump Supplier Selangor, Industrial Vacuum Distributor Malaysia ~ Glovac Sdn Bhd
Contact Us flagMalaysia