Description
PE 165 Multipurpose Adhesive
Polymer 165 is an acrylic emulsion with good plasticizer resistance and non-staining properties. It is protected against bio-degradation, withstands normal wet cleaning practices and is suitable for use over underfloor heating installations.
Properties
-
Acrylic emulsion
-
Non-staining
Technical Data
Appearance |
: Creamy paste |
Solids |
: 70.0 ± 2.0% |
Base polymer |
: Acrylic |
Carrier |
: Water |
Flammability |
: Non flammable |
Viscosity |
: 50,000 – 70,000 cps. |
Toxicity |
: Non-toxic |
S.G. |
: 1.26 ± 0.02 |
For Bonding of
-
Plasticized vinyl floor and wall coverings
-
PVC backed carpets or any types of carpet
-
Most of the commercial and domestic vinyl / sheet tile products
-
It will bond to both homogeneous and foamed backed type vinyl
-
Axminster, commercial, or any types of carpet
Onto
-
Sound, smooth dry subfloors of concrete; conventional sand / cement screeds or underlayment; plywood; hardboard or cement sheet underlays.
-
Other surfaces, such as Asphalt, granolithic, terrazzo, quarry tiles and concrete surfaces treated with waterproof membranes or some curing agents should be skimmed with a minimum of 3 mm of a proprietary cementitious underlayment according to manufacturer’s recommendations.
Coverage
Approximately 3 – 5 square meters per liter depending upon the condition and absorbency of the substrate and the type of applicator used.
Clean Up
Any Polymer 165 on the surface of the vinyl / carpet should be removed with a well dampened cloth – Do not allow to dry.
Shelf Life
12 months in unopened containers stored under appropriate conditions.
Storage
Recommended to be at temperatures between 5 and 30 degrees Celsius. Keep in well ventilated areas away from sources of heat.
Container Sizes
18.5 kg plastic containers
All product images shown are for illustration purposes only. Actual products may varies in term of size, colour, shades and other relevant characteristics.
More detail about DDS Sales & Marketing Sdn Bhd