About JAINNHER JHC-18
| MODEL | UNIT | JHC-18 | |
| CAPACITY | Standard Work Rest Dia | mm | Ø1 檀 Ø50 |
| Special Work Rest Dia | mm | Ø40 檀 Ø100 | |
| Max. Grinding Dia | mm | 250 | |
| Max. Job Weight In Centers | kgs | 70 | |
| WHEELHEAD | Grinding Wheel Size | D x W x H | Ø455 x 205 x 228.6 |
| Regulating Wheel Size | D x W x H | Ø255 x 205 x 111.2 | |
| Grinding Wheel Speed | rpm | 1,500 | |
| MOTOR | Regulating Wheel Speed | rpm | 13 – 316 (10 Steps) |
| Grinding Wheel Motor | HP | 15 | |
| Regulating Wheel Motor | HP | 2 | |
| Hydraulic Pump Motor | HP | 1 | |
| Coolant Pump Motor | HP | 1/4 | |
| HANDWHEEL | Regulating Wheel Feed | mm | 3.5 |
| Regulating Micro Feed | mm | 0.1 | |
| Table Feed | mm | 9 | |
| Table Micro Feed | mm | 0.2 | |
| Dressing | mm | 2 | |
| Regulating Wheel Tilt Angle | +5° 檀 -3° | ||
| Regulating Wheel Swivel Angle | +5° | ||
| GENERAL | Machine Height | mm | 1,550 |
| Floor Space | mm | 2,300 x 2,000 | |
| Machine Weight | kgs | 2,800 | |
| •Specification is subject to change without further notice. | |||
Malaysia
