Power Roller Conveyor Automation Malaysia Build

Power Roller Conveyor Automation Malaysia Build

Category: Power Moller System Malaysia Available
For more information, visit our official website at xtstech.com

Description

XTS Have own developed power roller that can use at your production Powered roller conveyor.
Power roller conveyor are used in industrial and distrubution operations. Powered Roller conveyors are the basic transportation conveyor to move products between locations with no human intervention. This Roller COnveyor can be use in Spiral Conveyor, Vertical Conveyor, Curve Conveyor, Flex Conveyor and Roller Conveyor.

XTS Power Roller Feature:

Brushless motor

            -High efficiency, Energy saving
            -Maintenance free, long life
            -Motor speed stability
Planetary reducer
            -High transmission efficiency
            -Low backlash, low noise
            
Basic specifications
 
Roller pipe
            -High rigidity
Ball bearing
            -long life, Smooth operation
Spring press-in shaft
            -Easy mounting
 

Item content
Direction of rotation Rotation in both directions
Characteristic rang by roller type Type Tangential speed (m/min) Tangential force (N)
1RR500 (φ50) 1.2~57.6 2.29~0.05
Operation Continuous operation
Speed setting DIP SW  Internalexternal Internal:volume  external:0~5V
DIP SW OP Mode  FB Mode OPvolume  FB:4 mode
Switching rotation direction DIP SW  Internalexternal Internal: DIP SW   External: Input signal
Protection function (stop) Motor open phase operation protection Detection of Hall IC fault
Abnormal voltage protection Input voltage 80 V or less, 120 V or more
Overload protection Restraint state 3 seconds or more
Overheat protection Electronic thermal driver 100 ° C or higher
             
 
Application: Right Angle Transfer, Shuttle, Table Lift, Turn Table Conveyor
 






Characteristics
 
Load capacity
‧  When there is an impact load, please set it to about 1/2 of the allowable load.
‧  Depending on the degree of shock load, the material of the goods to be conveyed, weight, it will differ considerably, so please allow enough margin.
‧  When exceeding the load that can be carried by the roller, please adopt the double row type of conveyor.
Approximate load rating (per one)
Total length of the Roller 450 mm 550 mm 650 mm
Load capacity (kg) 90 80 70
 
Mounting
‧  When the outer cylinder of the roller and the shaft have the same diameter as the free roller, the shaft hole of the free roller can be used as it is.
‧  When the dimensions are different, change the shaft hole of the frame to match the height with the free roller, so that the load is even. Depending on the material and smoothness of the material to be conveyed, please increase slightly when not touching the waist roller. In this case, please pay attention to the allowable load sufficiently because the load will be received only by the roller.
Roller length
‧ There is no standard, but it is required to be about 50 ~ 100 mm wider than the width of goods (or pallet) in principle.

Specification

 
Please contact us for South East Asia Market, Malaysia, Vietnam, Indonesia, Thailand, Philippines, Singapore, Brunei, Laos, Myanmar, New Zealand and Australia for more information. 

More detail about XTS Technologies Sdn Bhd
XTS Technologies Sdn Bhd
XTS Technologies Sdn Bhd Ultrasonic Cleaning System Supplier Malaysia, Robot Automation System Supply Selangor, Conveyor Automation Supplies Kuala Lumpur (KL), Perak ~ XTS Technologies Sdn Bhd
Contact Us flagMalaysia