MX0109A InfiniiMax III 26 GHz Extreme Temperature Solder-in Head

• 26 GHz bandwidth (with InfiniiMax III N2803A amp)
• Cdiff = 108 fF, Cse = 140 fF
• 100kΩ input Rdiff (@ DC), 1kΩ input Rdiff (@ >10kHz)
• 6:1 attenuation ratio, normal sensitivity
• Variable spacing from 5 mil – 250 mil (or 0.127 mm – 6.35 mm)
• Extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E

The MX0109A InfiniiMax III extreme temperature solder-in head is a semi-permanent solder-in connection that provides up to 26 GHz of system bandwidth. For extended temperature testing, the MX0109A supports extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E, making it ideal for testing electronics circuits and devices in environmental chambers.

• Compatible with InfiniiMax III and III+ probe amp
• The 130 ohm axial resistors at the tip of the MX0109A ZIF tip can be replaced when they are worn out or damaged.
• The replacement axial resistor kit for the MX0109A, N2836A and N2838A is N2836-68701. Each resistor kit contains 10 resistors.
• Operating temperature characteristics
  • -55°C dwell, 1000 hours minimum
  • +150°C dwell, 1000 hours minimum
  • -55°C to 150°C cycles, 750 cycles minimum per JEDEC JESD22-A104 revision E
• Use the N5450B extreme temperature extension cable to extend the cable length inside the chamber.