Description
Material : HDPE/NYLON/UHMWPE
Features :
• Shallow bottom elevator bucket for agricultural use.
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc
Using Recommendations
• Suitable for high-speed centrifugal discharge.
• Recommended minimum bucket spacing: the width of the bucket projection 'B'+50mm.
• Recommended elevator velocity ≤3.5m/s.
• Recommended a “Capacity L” as the available capacity for engineering design.
Technical Specifications :
|
Model |
Bucket Dimension* (mm) |
Mounting Holes (mm) |
Capacity (L) |
|
Length A |
Proj. B |
Depth C |
PCD E |
Standard Punching Holes |
Hole Diameter |
Distance Down D |
|
SB1107 |
110 |
77 |
86 |
72 |
2 |
7 |
25 |
0.45 |
|
SB1307 |
134 |
77 |
86 |
72 |
2 |
7 |
25 |
0.56 |
|
SB1309 |
135 |
96 |
92 |
80 |
2 |
7 |
30 |
0.75 |
|
SB1812 |
185 |
120 |
120 |
120 |
2 |
9 |
40 |
2 |
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
|
Material |
HDPE |
Nylon 6 |
UHMWPE |
PU |
Mild Steel |
Stainless |
|
Cost |
1 |
3 |
3 |
4 |
2 |
4 |
|
Wear Resistance |
1 |
2 |
3 |
4 |
3 |
4 |
|
Impact Resistance |
1 |
2 |
2 |
2 |
2 |
2 |
|
FDA Food Approved |
Yes |
Yes |
Yes |
No |
No |
No |
|
Max Temp℃ Continuous |
70 |
100 |
70 |
60 |
180+ |
250+ |
|
Max Temp℃ Peak |
80 |
120 |
80 |
70 |
220 |
400 |
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ . • Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved),
Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.
More detail about EAI Marketing Sdn Bhd
Malaysia
