Fluke 1587/1577 Insulation Multimeter: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Mobicon

Description

Consult the features included on the two new insulation multimeters in the comparison chart below to help select the best tool for your application:

Feature	1587	1577
Insulation test voltages 50V, 100V, 250V, 500V, 1000V	•
Insulation test voltages 500V, 1000V		•
Insulation test: 0.01 MΩ to 2.0 GΩ	•
Insulation test: 0.1 MΩ to 600 MΩ		•
Auto discharge of capacitive voltage	•	•
Insulation test smoothing reading	•
Frequency	•
Capacitance	•
Diode test	•
Temperature	•
Min/Max	•
Low pass filter (for work on VSD's)	•
AC/DC Voltage	•	•
DC millivolts	•	•
AC/DC milliamps	•	•
Resistance (0.1 Ω to 50 MΩ)	•	•
Continuity	•	•
Three-year warranty	•	•
Remote probe, test leads, alligator clips	•	•
K-type thermocouple	•
Rugged, utility hard case	•	•
Auto power off to save battery power	•	•
True-rms	•	•
Large display with backlight	•	•
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection	•	•
CAT III 1000V, CAT IV 600V measurement category	•	•
Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work	•	•

Specifications

Voltage DC

Maximum Voltage:	1000 V
Accuracy:	1577: ±(0.2%+2)
	1587: ±(0.09%+2)
Maximum Resolution:	0.001V

Voltage AC

Maximum Voltage:	1000 V
Accuracy:	1577: ±(2%+3)
	1587: ±(2%+3)
AC Bandwidth:	1587: 5kHz*
	*with low pass filter; 3db @ 800 Hz
Maximum Resolution:	0.1 mV

Current DC

Maximum Amps:	400mA
Amps Accuracy:	1577: ±(1.0%+2)
	1587: ±(0.2%+2)
Maximum Resolution:	0.01 mA

Current AC

Maximum Amps:	400mA
Amps Accuracy:	1577: ±(2.0%+2)*
	1587: ±(1.5%+2)*
	* 1kHz bandwidth
Maximum Resolution:	0.01 mA

Resistance

Maximum Resistance:	50 MΩ
Accuracy:	1577: ±(1.2%+2)
	1587: ±(0.9%+2)
Maximum Resolution:	0.1Ω

Capacitance(1587 only)

Maximum Capacitance:	9,999 µF
Accuracy:	±(1.2%+2)
Maximum Resolution:	1 nF

Frequency (1587 only)

Maximum Frequency:	100 kHz
Accuracy:	±(0.1%+1)
Maximum Resolution:	0.01 Hz

Temperature Measurement (1587 only)

	-40.0 °C to 537 °C
	-40.0 °F to 998 °F
	excluding probe

Diode Test (1587 only)

Range:	6 V
Resolution:	1 mV
Accuracy:	±(2 % + 1)

Insulation Test

Minimum Test Current @ 1kΩ/V:

1mA

Test Voltages:

1577:	500, 1000 V
1587:	50, 100, 250, 500, 1000 V

Maximum Resistance per Test Voltage:

50V:
100V:
250V:
500V:
1000V:	1577: 600 MΩ
	1587: 2 GΩ

Maximum Resolution per Test Voltage:

50V:	0.01 MΩ
100V:	0.01 MΩ
250V:	0.1 MΩ
500V:	0.1 MΩ
1000V:	0.1 MΩ

Accuracy per Test Voltage:

50V:	±(3 % + 5)
100V:	±(3 % + 5)
250V:	±(1.5 % + 5)
500V:	1577: ±(2.0 % + 5)
	1587: ±(1.5 % + 5)
1000V:	1577: ±(2.0 % + 5)
	1587: ±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ

Environmental Specifications

Operating temperature

–20 °C to +55 °C

Storage temperature

-40°C to +60°C

Humidity (Without Condensation)

	0% - 95% (10 °C – 30 °C)
	0% - 75% (30 °C – 40 °C)
	0% - 40% (40 °C – 55 °C)

Operating Altitude

2000 m

Safety Specifications

Overvoltage category

Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V

Agency Approvals

2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

Mechanical & General Specifications

Size

203 x 100 x 50 mm (with holster)

Weight

624 g

Warranty

3 years

Battery life Alkaline

Meter use:	1000 hours
Insulation test use:	Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.

IP Rating

IP40

[Download Datasheet]

More detail about Mobicon - Remote Electronic Sdn Bhd