About MN Series
| ITEM | UNIT | MN-26 | MN-30 | ||||
| CAPACITIES | Center height | mm(inch) | 330(12.99") | 430(16.96") | |||
| Distance between centers | mm(inch) | 920(36"), 1 42 0( 5 6 19 20( 76 292 0(1 15 ")"), 3920(154") | |||||
| Swing over bed | mm(inch) | 660(25.98") | 760(29.92") | ||||
| Swing over gap | mm(inch) | 940(37.01") | 1040(40.95") | ||||
| Swing over cross slide | mm(inch) | 440(17") | 540(21") | ||||
| Width of bed | mm(inch) | 450(17") | |||||
| Bed way | 3V + 1 Flat way | ||||||
| Cross slide width | mm(inch) | 250(10") | |||||
| Gap width | mm(inch) | *350(13.78") | |||||
| HEADSTOCK | Spindle bore / nose | mm(inch) | 105 ( D1 11 / 155 (6")A2 11 / 180 (7")A2 15 / 230 (9")A2 15 | ||||
| Spindle tapper | MT #7 | ||||||
| Spindle speed | rpm | 4" bore (20-1500 rpm) / *6" bore (20-1000 rpm) / *7" bore (20-1000rpm) /*9" bore (20-800rpm) ( auto 3 steps) | |||||
| CROSS SLIDE (X-AXIS) & CARRIAGE (Z-AXIS) | Cross slide travel (X-axis) | mm(inch) | 405(16") | ||||
| Longitudinal travel (Z-axis) | mm(inch) | 970(38"), 1470(57"), 1970(77"), 2970(117"), 3970(156") | |||||
| AC servo motor (X-axis) | kw | 1 | |||||
| AC servo motor (Z-axis) | kw | 2 | |||||
| Dia of ball screw (X-axis) | mm | Ø 32 x P5 x C3 | |||||
| Dia of ball screw (Z-axis) | mm | Ø 50 x P10 x C5 | |||||
| Rapid traverse speed (X-axis) | mm/min | 6000 | |||||
| Rapid traverse speed (Z-axis) | mm/min | 8000 | |||||
| TAILSTOCK | Quill taper | MT #5 | |||||
| Quill diameter | mm(inch) | Ø 105(4") / * rotation Ø 165(6.5") | |||||
| Quill travel | mm(inch) | 250(10") | |||||
| TURRET / TOOLPOST | Tool station | *horizontal type 4T | *vertical type 8T / *vertical type 10T | ||||
| Size of external turning tool | mm | 25 | |||||
| MOTOR | Main spindle | kw | 11/*15 [*15hp (15hp inverter)] | ||||
| Headstock speed auto change x 1 | w | 25 | |||||
| Lube system pump | w | 22 | |||||
| Hydraulic oil pump | hp | 2 | |||||
| Coolant pump | hp | 1/8(90 w) | |||||
| ACCURACY | Positioning | mm | +0.01 / 300 | ||||
| Repeatability | mm | 0.005 | |||||
| Spindle run-out | mm | 0.01 | |||||
| TANK CAPACITY | Hydraulic tank | l | 60 | ||||
| Coolant tank | l | 37 | 93 | 93 | 112 | 112 | |
| CONTROLLER | Controller | brand | Simens / Fagor / Fanuc / Mitsubishi | ||||
| Controllable | axis | 2 | |||||
| WEIGHT | Net / Gross | kg (lb) | 3700(8140)/ | 4000(8800)/ | 4300(9460)/ | 5000(11000)/ | 5700(12540)/ |
| 3900(8580) | 4250(9350) | 4650(10230) | 5450(11990) | 6250(13750) | |||
| DIMENSIONS | Floor space (full guard) L x W x H | mm(inch) | 3200x | 3700x | 4200x | 5200x | 6200x |
| 2000x2000 | 2000x2000 | 2000x2000 | 2000x | 2000x2000 | |||
| (114"x79"x79") | (134"x79"x79") | (154"x79"x79") | 2000(193"x79"x79") | (232"x79"x79") | |||
| •Specification is subject to change without further notice. | |||||||
Malaysia
