Saluki S5104 Series Radio Communications Test Set (300kHz - 1.05GHz / 3GHz)

S5104 Series Radio Communications Test Set, which is a multifunctional and portable model based on software radio architecture, integrates plentiful functions, like frequency-hopping signal generation and analysis, vector signal generation and demodulation analysis, analog modulation signal generation and demodulation analysis, audio signal generation and analysis, audio oscilloscope, automatic testing and so on. The tester is capable of major performance testes on transmit and receiving of radio communication equipment, measurement and analysis on feature parameters of RF, modulation, audio, and digit etc. Wide applications of the tester cover R&D, production, verification, maintenance and repair, and testing on radio communication equipment, including short-wave/ultra short-wave radio stations, data link systems, communication and surveillance satellites, radio relay equipment. Military mobile carriers with radio communication terminals like communication vehicles, surveillance vehicles, vessels and ships, as well as external field tests can use this tester conveniently.

 

 

Main Functions

Auto Testing Functions of Radio Communication Equipment

S5104 series radio communications tester can create and edit models, parameters and qualified specification limits of DUT. Choose your DUT and connect testing cable, the comprehensive tester will automatically conduct the testing. It controls transmit and receiving of the DUT by PTT. When the DUT needs setup or the cable needs being changed, the tester will automatically halt the testing and indicate further operation. The testing goes on after the operation is finished. Qualified and unqualified items will be listed directly. Other functions, like storage, viewing, comparison and remote readout, are also available.

 

 

Transmitter Testing

S5104 series radio communications tester can conduct simultaneous tests on various performance specifications of transmitters, like signal power, frequency error, signal modulation characteristics, demodulation audio, and so on. Audio signals of transmitters can be provided and single/double tones are available for your choice. It can simulate pilot signals. 

 

Receiver Testing

S5104 series radio communications tester is able to send out FM, AM and SSB RF signals; analyze audio demodulation of the receiver; measures accurately audio frequency, voltage, distortion degree, SINAD and SNR.

 

Function As RF Signal Generator

Analog modulation of FM, AM, SSB etc and digital modulation of BPSK, QPSK, 8PSK, GMSK,16QAM and so on can all be output. The max. symbol rate of digital modulation is 5MHz. The tester upholds generation of 60MHz transient bandwidth frequency-hopping signals. 

 

RF Receiving And Demodulation

S5104 series radio communications tester is capable of demodulation and analysis of analog modulation like FM, AM, SSB etc and that of digital modulation signals including BPSK, QPSK, 8PSK, GMSK and 16QAM. Demodulation parameters and waveforms can be output. The max. demodulation bandwidth of analog modulation signals reaches 300kHz and the max. symbol rate of digital modulation and signal demodulation is 5MHz. Narrow band power measurement is available.

 

Sweep Spectrum Analysis

S5104 series radio communications tester has wide frequency band, high resolution, high sensitivity, big dynamic range and other characteristics. 

 

Frequency-hopping Signal Analysis

The max. transient analysis bandwidth of frequency-hopping signals is 60MHz. The display types are three-dimensional spectrum graph, time-frequency graph and time-amplitude graph. The tester can capture, store and analyze frequency-hopping signals. You can view spectrum and modulation domain graphs at any time. When modulation domain measurement is in progress, it is capable of accumulation and display of frequency points within any timeframes. Frequency-hopping points can be observed directly. Pulse signals and transient signals can also be measured.

 

Audio Signal Generation

Single and double tones are available for your choice. The max. output level reaches 7Vrms. 

 

Audio Signal Analysis

Audio filter is optional. The max. input level is up to 30Vrms. The tester supports measurements on frequency, level, distortion degree, SINAD and SNR, as well as audio waveform display.

 

Simultaneous Operation on Multiple Windows

Support simultaneous operation of 4 windows at most, each window can be enlarged individually.

 

Typical Applications

S5104 series radio communications test set is extensively employed due to the powerful functions and performances, which is used for R&D, repair, maintenance and testing of communication equipment. 

 

 

Technical Specifications

RF Signal Generation
Frequency Range	S5104B: 1MHz - 1.05GHz
	S5104C: 1MHz - 3GHz
Frequency Resolution	1Hz
Output Level Range	GEN: -120dBm to +5dBm(max. modulation 0dBm)
	T/R interface: -130dBm to -35dBm
Level Resolution	0.1dB
Level Accuracy	±1.5dB(>-110dBm), ±2.0dB(<-110dBm)
SSB Phase Noise	f<=1.05GHz: -93dBc/Hz @20kHz
	f>1.05GHz: -90dBc/Hz @20kHz
Harmonic	Better than -25dBc (>1MHz, <0dBm)
Non-harmonic	Better than -35dBc (>1MHz, +5dBm output)
Internal Analog Modulation Source	Sine, square wave, triangle, saw-tooth, dual-tone (analog pilot)
Broadband Power Measurement
Frequency Range	S5104B: 400kHz - 1.05GHz
	S5104C: 400kHz - 3GHz
Measurement Range	ANT interface: 0.1mW - 100mW
	T/R interface: 100mW - 150W
Measurement Accuracy	15% (<=120W, CW or frequency modulation)
Narrow Band Power Measurement
Frequency Range	S5104B: 300kHz - 1.05GHz (low frequency depends on small IF bandwidth)
	S5104C: 300kHz - 3GHz (low frequency depends on small IF bandwidth)
Measurement Range	ANT interface: +10dBm to -80dBm
	T/R interface: +51dBm to -40dBm
Measurement Accuracy	±2dB
Receiving Bandwidth	6.25, 8.33, 10, 12.5, 25, 30, 100, 300kHz
Frequency Error Meter
Frequency Range	S5104B: 300kHz - 1.05GHz (low frequency depends on small IF bandwidth)
	S5104C: 300kHz - 3GHz (low frequency depends on small IF bandwidth)
Accuracy	Frequency standards ±1Hz
Audio Signal Generation
Waveform	Sine, square wave, triangle, saw-tooth
Signal Type	Single-tone, dual-tone
Frequency	20Hz - 20kHz (sine), 20Hz - 4kHz (square wave, triangle, saw-tooth)
Frequency Resolution	0.1Hz
Level Range	1mV - 7Vrms (10kΩ  load)
Level Accuracy	±5% (10kΩ load >=10mVrms)
Audio Signal Analysis
Input Impedance	150Ω, 600Ω, high impedance
Max. input Level	30Vrms (high impedance)
Audio Filter	Low-pass: 300Hz, 5kHz, 15kHz, 20kHz
	Band-pass: 0.3-3.4kHz, 0.3-5kHz, 0.3-15kHz, 0.3-20kHz
Sweep Spectrum Analyzer
Frequency Range	S5104B: 100kHz - 1.05GHz
	S5104C: 100kHz - 3GHz
Sweep Width	0Hz - whole frequency bands
Level Precision	±1.5dB
Min. DANL	ANT interface: better than -125dBm
	T/R interface: better than -75dBm
Resolution Bandwidth	30Hz - 3MHz (1-3 stepping)
Demodulation And Analysis of Analog Modulation Signals
Frequency Range	S5104B: 300kHz - 1.05GHz (low frequency depends on small IF bandwidth)
	S5104C: 300kHz - 3GHz (low frequency depends on small IF bandwidth)
Signal Format	FM, AM, SSB
Demodulation	6.25, 8.33, 10, 12.5, 25, 30, 100, 300kHz
Demodulation Audio Filter	Low-pass: 300Hz, 5kHz, 15kHz, 20kHz
	Band-pass: 0.3-3.4kHz, 0.3-5kHz, 0.3-15kHz, 0.3-20kHz
Frequency Range of Demodulation Counter	20Hz - 20kHz
Demodulation Counter Resolution	0.1Hz
Sensitivity	<-100dBm (10dB SINAD, ANT interface)
Demodulation And Analysis of Vector Signals (Option)
Frequency Range	S5104B: 300kHz - 1.05GHz (low frequency depends on small IF bandwidth)
	S5104C: 300kHz - 3GHz (low frequency depends on small IF bandwidth)
Signal Format	GMSK, BPSK, QPSK, 8PSK, 16QAM
Demodulation Bandwidth	10kHz - 10MHz
Max. Symbol Rate	5MHz
Frequency-hopping Signal Analysis (option)
Filter	RC, RRC, GAUSS
Transient Bandwidth	60MHz, 30MHz, 15MHz, 7.5MHz, 3.75MHz, 1.875MHz
Capture Storage Depth	8GB
Analysis Domain	Time-frequency (modulation domain), time-amplitude, time-spectrum (waterfall chart), spectrum at random time
Min. Time Resolution	10ns
Dual-channel Oscilloscope
Frequency Range	DC-4MHz
Vertical Scale	10mV - 10V/mark (1, 2, 5 stepping)
Horizontal Scale	1us - 1s/mark (1, 2, 5 stepping)
Coupling Type	DC, AC
Input Impedance	1MΩ
Digital SequenceGeneration And Bit Error Rate  Measurement(option)
Digital Format	PN3, PN5, PN9, PN11
Baud Rate	300bps - 1Mbps (BPSK, GMSK, 2FSK, 2ASK)
Bit Error Rate Measurement Range	0.1 - 0.000001
Internal Time-base	Frequency: 10MHz; Aging rate: 1×10-7/year;Temperature stability: ±0.05ppm (0 - 50°C)

More specifications in the datasheet.

 

 

General Information

Dimensions (W×H×D)	426×222×180mm (without handles and auxiliaries)
Weight	<= 12kg
Working Temperature	0°C to +50°C
Storage Temperature	-40°C to +70°C
Power Supply	Internal AC: 220V±10%, frequency 50Hz±5%; External DC: 24V±2V (16V is Acceptable); Built-in and rechargeable battery: >=11000mAh (option)
Consumption	<100W
Cooling Type	Internal air cooling
Interface	RF: GEN interface(TNC), T/R interface(type N), ANT interface(TNC) BNC: audio input, audio output, oscilloscope input etc Others: network port (support remote control), 26-core testing bus interface, USB-host interface etc.

 

Standard Package

No.	Item	Qty.
1	Main machine	1 PC
2	User manual	1 PC
3	Tri-core 220VAC power cord	1 PC
4	N-BNC adapter	1 PC
5	N-SMA adapter	1 PC
6	TNC-SMA adapter	1 PC

 

Options

Option No.	Item
S5104-H01	Built-in lithium battery
S5104-S01	Software for vector signal generation and bit error rate measurement
S5104-S02	Software for vector signal demodulation and analysis
S5104-S03	Software for frequency-hopping signal generation
S5104-S04	Software for frequency-hopping signal analysis
S5104-S05	Software for dual-channel oscilloscope