Forced Convection Oven (DKN602)

Forced Convection Oven (DKN602)

Category: DKN Series Available
For more information, visit our official website at renetech.com.my

Description

Standard ''Best Seller'' ovens - Fully programmable
 
Features of Forced Convection Oven (DKN602)
Safety features
Self diagnosis functions (Temperature sensor abnormal, Heater disconnection, SSR-short) Automatic overheating prevention, Electric leakage breaker with over current protection, Key lock function

<table border=''1'' cellpadding=''5'' cellspacing=''0'' style=''width:900px;''>
Item Code 212872
Model DKN602
Circulation method Forced air circulation
Operating temp. range Room temp. +10°C to 260°C
Temp. adjustment accuracy ±1℃(at 210℃)
Temp. distribution accuracy ±2.5℃(at 210℃)
Max. temp. reaching time Approx. 90 min.
Interior/Exterior material Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material Glass wool
Heater Stainless pipe heater
Heater 1.5kW
Fan Type / Fan Motor Scirocco fan, Condenser type motor 10W
Cable hole 30mm I.D. (on the right side) 1pc.
Exhaust port 30mm I.D. x 2 (on top)
Observation window 250×280mm Chemical strengthening glass x 3
Temp. controller 3 patterns program controller, PID control by microprocessor
Temp. setting method Digital setting by UP/DOWN key
Temp. display Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function Fixed temperature operation, Program operation, Auto start, Quick Auto-stop
Program mode Program operation : 3 patterns, 30 steps(30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Shelf plate with standard load ~15kg/piece
Shelf support step number/pitch 13 steps / 30mm
Shelf plate Stainless steel, 1pc on the bottom screwed (DKN912C, 2 pcs)
Shelf plate / support 2 pcs. / 4 pcs.
Internal dimensions(W×D×H mm) 600×500×500mm
External dimensions(W×D×H mm) 710×651×870mm
Remarks(dimensions) 150L
Power Source AC115V 12.5A
Single-phase
Weight 65kg

Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

More detail about Renetech Sdn Bhd
Renetech Sdn Bhd
Renetech Sdn Bhd Lab Equipment Selangor, Rotary Evaporator Supply Kuala Lumpur (KL), Laboratory Washer Supplier Malaysia ~ Renetech Sdn Bhd
Contact Us flagMalaysia