AN-E1-MUXlite provides conversion between ITU-T G.703 standard E1 framed interface and up to 30 FXS/FXO standard POTS analogue telephone lines. AN-E1-MUXlite is the fundamental equipment for the digital communication system and it
has another name, i.e. PCM basic group equipment. The equipment is used to converge the
signals such as voice, data and image into a standard 2M interface via various interface boards,
and realize point-to-point transmission. V35, 2/4 E&M, RS-232, and Ethernet ports as options along with voice over same E1.
E1 interface
Interface standard: Conforms to G.703 standard
Interface rate: N×64Kbps, N:1~31
Code: HDB3
Interface impedance: 75A (unbalanced), 120A (balanced)
Connecter: BNC (75 A), RJ45 (120 A)
Vibration characteristic: Satisfies G.742 and G.823 standard
Clock type: internal-clock, line clock
FXS phone port
Ring voltage:75V
Ring frequency:25HZ
Two line input impedance:600A(hanging off)
Wastage:40 db
FXO switch port
Ring test voltage:35V
Ring test frequency:17HZ-60HZ
Two line input impedance:600A(hanging-off)
Wastage:40 db
V.35 interface
Interface type: V.35 synchronous
Velocity: N×64Kb/s (N =1~15)
Clock mode: DCE
Environmental
Operating temperature: -25 C~+70 C
Storage temperature: -40 C~+80 C
Relative temperature:95% (uncondensed)
Power supply
option I – DC-48V,range DC-36V~DC-72C
option II – AC220V,range AC165V~AC265V
Dimensions:
483(L)×140(W)×50(H)mm
AN-E1-MUXlite |
Basic configuration: PCB panel+1*E1(support BNC 75ohm and RJ45 120ohm),DC-48V built-in |
FXO |
1 additional FXO channel |
FXS |
1 additional FXS channel |
Ethernet |
Ethernet channel |
RS-232 |
RS-232 channel |
V35 |
V.35 channel |
E1 ports |
1 |
---|---|
Voice Ports (Telephone) |
30 |