Forced Convection Oven (Energy Saving) (DNE611)

Forced Convection Oven (Energy Saving) (DNE611)

Category: DNE Series Available
For more information, visit our official website at renetech.com.my

Description

High-performance, energy-saving, programmble constant temperature, forced convection ovens.
 
Features of Forced Convection Oven (Energy Saving) (DNE611)

Available Various Functions
Specifications
Item Code 212825
Model DNE611
Temp. adjustment accuracy ±0.5°C (at 210°C)
Temp. distribution accuracy ±2.0°C (at 210°C)
Max. temp. reaching time Approx. 70 min.
Interior/Exterior material Stainless steel /Electro-galvanized steel sheet with epoxy and melamine resin baking finish
Operation function Fixed temperature operation, Program operation, Auto start, Auto-stop, Quick automatic stop
Program mode Program operation; Maximum 32 steps, Repeat function
Additional functions Timer Function (Actual Timer within 24hrs.), Total operation hours timer (to 65535hrs.), Calendar time ( 24 hours),
Shelf plate with standard load Approx. 15kg/piece
Heat insulating material Glass wool
Heater Stainless pipe heater
Heater 1.2kW
Fan Type Scirocco fan
Motor Condenser type,10W
Cable hole/Air in-take hole 33mm I.D. (the right side) 1pc.
Temp. controller PlD Z control by microprocessor
Temp. setting method Digital setting by UP/DOWN key
Temp display method Digital Display by Green LED
Timer/Min.division 0 min. to 99 Hrs. 59 min. /1 min.
Additional functions Calibration offset, Power discharge, CO2 discharge, Power failure return mode, User configuration information
Heater circuit control Triac zero-cross control
Safety countermeasures Self diagnosis functions (Temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention),
Safety countermeasures Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Shelf support step number 13 steps
Shelf support pitch 30 mm
Accessories Shelf plate Stainless steel, 2 pcs.
Accessories Shelf support 4 pcs. (1 pair - 2 pcs. is fixed)
Method Forced air circulation
Operating temperature range Room temp. +20 to 210°C
Internal dimensions(W×D×H mm) 600×500×500mm
External dimensions(W×D×H mm) 730×695×910mm
Remarks(dimensions) 150L
Power Source AC220V 7A
Single-phase
Weight 77kg

Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

More detail about Renetech Sdn Bhd
Renetech Sdn Bhd
Renetech Sdn Bhd Lab Equipment Selangor, Rotary Evaporator Supply Kuala Lumpur (KL), Laboratory Washer Supplier Malaysia ~ Renetech Sdn Bhd
Contact Us flagMalaysia