| Item Code | 212904 |
|---|---|
| Model | DN611I |
| Method | Forced Convection |
| Operating temp. range | Room Temp. +15 to 360°C |
| Temp. adjustment accuracy | ±0.2℃（at 360℃） |
| Temp. fluctuation | ±0.6℃（at 360℃） |
| Temp. uniformity | ±3℃（at 360℃） |
| Temp. gradient | 20℃（at 360℃） |
| Max. temp. reaching time | Approx. 60 min. |
| Nitrogen substitution time required | Approx. 70 min. (Ordinary temp with nitrogen concentration of 2%) |
| Interior | Stainless steel plate |
| Exterior | Cold rolled steel plate with baked melamine resin coating |
| Heat insulator | Glass wool + Ceramic fiber |
| Heater | Stainless pipe heater 4.0kW |
| Sensor | K thermocouple for temperature control and independent overload prevention device |
| Fan type / Motor | Sirocco Fan / Condenser type |
| Flow meter, Gas carrier | Max. flow 30L/min, O.D. 9mm hose nipple |
| Temp. controller | PID control by microcomputer |
| Temp. display type | Temp. display: Digital display by 4 digit green LED (resolution:1oC) Setting temp. display: Digital display by 5 digit orange LED (resolution:1oC) |
| Timer / Timer resolution | 1min. to 99hrs. 59mins. or 100hrs. to 999hrs. / 1min. or 1hr.59分 |
| Operation function | Fixed temp. operation, Auto-start, Auto-stop, Quick autostop, Program operation |
| Program mode | Repeatable operation function up to max 99 steps or 99 patterns. |
| Additional functions | Power on and operation time integrating function (up to 65535 hours), Calendar time (24 hours), Calibration offset, Monitor display of integrated power consumption |
| Additional functions | Total CO2 emissions and heater operating output, Power failure recovery mode, Save and read out of user settings |
| Heater circuit control | Heater circuit control |
| Safety device | Self diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main relay contact damaged, Automatic overheat prevention), |
| Safety device | Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch |
| Shelf max. load | Approx. 30kg / shelf |
| Shelf support step number/pitch | 17pcs. / 30mm |
| Shelf plate / support | Stainless wire, 2 pcs. / 4 pcs |
| Internal dimensions（W×D×H mm） | 620×600×600mm |
| External dimensions（W×D×H mm） | 790×845×1065mm |
| Remarks(dimensions) | 223L |
| Power Source |
AC220V 20A Single-phase |
| Weight | 130kg |
Malaysia
