Spray Dryer Pulvis Mini Bed (GB210-B): Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Puchong Renetech Sdn Bhd

Description

Spray dryer capable of granulating and drying wet powder.

Features of Spray Dryer Pulvis Mini Bed (GB210-B)

Designed to granulate powder and dry wet powder using a fluid bed. This is a fluid bed drying granulator used in combination with the basic unit GB210 and Mini-bed attachment GF200.
The chamber is made of ultra hard glass and the user can observe status of the fluid bed or spraying status. Also, the flowage meter, the spraying pressure
meter, the chamber inlet/outlet temperature indicator are useful for evaluation of data
The unit can also be used as a spraying dryer by installing the mini spray attachment GF300 (optional)
The unit has an automatic lift as a standard to enable convenient installation or removal of the glass chamber attachment

Control Panel

Inlet temperature, outlet temperature, and drying air amount are digitally displayed. Setting is made on the touch panel that allows operation settings, operation status display as well as error display, and settings of various operation conditions.

Specifications

Item Code	212778
Model	GB210-B
Temp. adjusting unit setting range	40 to 220°C (inlet temperature), 0 to 98°C (Outlet temperature)
Temperature adjusting accuracy	Inlet temperature ± 1°C
Spraying system	Two-way nozzle, Nozzle No. 1A as standard
Drying air amount adjusting range	0 to 0.7m3/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26mL/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26 mL/min
External output	Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Automatic lift	Moving up/down of glass chamber automatic lift
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, Heater, Liquid sending pump, Pulse jet switch, Error display
Control select switch	Inlet temperature, Output temperature control switch (Outlet temp. control is conditional)
Temperature sensor	K-thermocouple
Heater	2.0kW (at200V) to 2.88kW (at240V)
Liquid sending pump	Fixed amount peristaltic pump
Spraying air pump	Spraying air compressor (Sold separately) is used
Service outlet	For stirrer: AC100V, Max. 2A
Suction blower	Bypass blower, Brushless DC motor
Filter	Suction filter, Exhaust filter
Recovery of solvent	Solvent recovery unit GAS410 (Sold separately) is used
Spray nozzle cooling mechanism	Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter	Nipple diameter: ø7mm
Exhaust connecting diameter	ø50mm
Exhaust connecting diameter	ø50mm
Safety device	Inlet/Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
Accessories	Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table
External dimensions（W×D×H mm）	760×420×1350mm
Power Source	AC220V 17A Single phase
Weight	110kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

More detail about Renetech Sdn Bhd