Control Techniques Unidrive SP Panel Mount: Top Choice in Malaysia, Selangor, Kuala Lumpur Socos Engineering Sdn Bhd

Description

0.37 kW - 132 kW (0.5 hp - 200 hp)

200 V / 400 V / 575 V / 690 V

Unidrive SP Panel Mount are standard AC input, AC output drives for installation within a control panel. The drives are easy to install and commission and can be applied in a wide range of applications. Unidrive SP can be configured to operate in the following modes:

Open loop V/Hz AC drive
Open loop Vector AC drive
Open loop Rotor Flux Control (RFC)
Closed loop Vector AC drive
Servo for synchronous permanent magnet motors / brushless servo motors

Features
Widest range of system integration features

Unidrive SP offers the widest range of system integration features, each drive can accept three option modules, allowing you to select the level of integrated automation / motion control, connectivity and I/O that you need. Click on the options tab for more information.

High performance motor control

Unidrive SP is applied in the most demanding applications, where dynamic, high performance motor control is required, from precision automotive test stands to high speed manufacturing machinery.

Back-up power supplies for continuous operation

Back-up power supplies ensure the drives are always ready for action, eliminating start-up routines and providing safety back-up for critical equipment.
- 24 Vdc input for control - Allows the control circuits of Unidrive SP to remain active when the AC supply is removed. This enables fieldbus modules, application modules and encoders to continue to operate.
- 48-96 Vdc input for power - Allows the drives power output to control the motor, often used for emergency back-up situations such as for moving elevators to an exit during a power supply failure.
Flexible power systems - lower harmonics

In applications where there is a significant amount of stored mechanical energy, the drive must be able to transfer the energy from the mechanical system to control the motor speed. Unidrive SP can be used to return excess energy to a shared DC bus or to the AC supply. Benefits include:
- Energy saving
- Sinusoidal input current (low harmonic content)
- Unity or controllable input power factor
On-Board PLC

Unidrive SP has an inbuilt programmable controller. It is configured using an easy-to-use ladder logic program editor, suitable for replacing relay logic or a micro PLC for simple drive control applications.

Easy Parameter Back-up and Copy

The Smartcard is a memory device that is supplied with every Unidrive SP, it can be used to back-up parameter sets and PLC programs and copy them from one drive to another.
- Parameter and program storage
- Simplify drive maintenance and commissioning
- Quick set-up for sequential build of machines
- Machine upgrades can be stored on a Smartcard and sent to the customer for installation
Integrated brake resistors

Unidrive SP frame sizes 0 to 2 feature an optional heatsink mounted brake resistor. This arrangement simplifies installation and requires no additional space.

Flexible mounting

Unidrive SP panel mount drives can be surface mounted or the heatsink through panel mounted, allowing the heat to be dissipated externally. This reduces the temperature rise inside the control panel. An IP54 (NEMA 12) mounting kit is included with the drive as standard and IP54 (NEMA 12) versions of the heatsink fan are available as an option. This mounting method allows smaller enclosure dimensions and reduces the need for ventilation.

Safety as standard

Unidrive SP’s Safe Torque Off (STO) is a functional safety feature which complies with EN/IEC 61800-5-2 SIL 3 and is built in to the drive as standard. When the Safe Torque Off function is active, the drive output is disabled with a high degree of integrity.
- Certified by BGIA and TÜV
- Allows the drive to become part of the machine safety system
- Reduces user cost in machine safety controller designs that must comply with EN/IEC 62061 up to SIL 3, EN ISO 13849-1 up to PL e, EN 954-1 category 3 and EN 81-1 for elevators
- Eliminates one or more power contactors
- Eliminates feedback checking arrangement
- Drive can be powered continuously
Safe Torque Off can form part of an EN 954-1 Category 4 system by adding additional control circuitry.

Specifications

Key specifications

200 V drive ratings (200 V to 240 V ± 10 %)

MODEL		NORMAL DUTY				HEAVY DUTY
		MAXIMUM CONT. OUTPUT CURRENT	NOMINAL POWER AT 220 V	MOTOR POWER AT 230 V	PEAK CURRENT	MAXIMUM CONT. OUTPUT CURRENT	OPEN LOOP PEAK CURRENT	CLOSED LOOP PEAK CURRENT	NOMINAL POWER AT 220 V	MOTOR POWER AT 230 V


		A	kW	hp	A	A	A	A	kW	hp
	0201					2.2	3.3	3.8 (3.3)*	0.37	0.5
	0202					3.1	4.6	5.4 (4.6)*	0.55	0.75
	0203					4.0	6.0	7.0 (6.0)*	0.75	1.0
	0204					5.7	8.5	9.9 (8.5)*	1.1	1.5
	0205					7.5	11.2	13.1 (11.2)*	1.5	2.0
	1201	5.2	1.1	1.5	5.7	4.3	6.4	7.5	0.75	1.0
	1202	6.8	1.5	2.0	7.4	5.8	8.7	10.1	1.1	1.5
	1203	9.6	2.2	3.0	10.5	7.5	11.2	13.1	1.5	2.0
	1204	11	3.0	3.0	12.1	10.6	15.9	18.5	2.2	3.0
	2201	15.5	4.0	5.0	17.0	12.6	18.9	22	3.0	3.0
	2202	22	5.5	7.5	24.2	17	25.5	29.7	4.0	5.0
	2203	28	7.5	10	30.8	25	37.5	43.7	5.5	7.5
	3201	42	11	15	46	31	46.5	54.2	7.5	10
	3202	54	15	20	59	42	63	73.5	11	15
	4201	68	18.5	25	74	56	84	98	15	20
	4202	80	22	30	88	68	102	119	18.5	25
	4203	104	30	40	114	80	120	140	22	30
	5201	130	37	50	143	105	157	183	30	40
	5202	154	45	60	169	130	195	227	37	50

400 V drive ratings (380 V to 480 V ± 10 %)

MODEL		NORMAL DUTY				HEAVY DUTY
		MAXIMUM CONT. OUTPUT CURRENT	NOMINAL POWER AT 400 V	MOTOR POWER AT 460 V	PEAK CURRENT	MAXIMUM CONT. CURRENT OUTPUT	OPEN LOOP PEAK CURRENT	CLOSED LOOP PEAK CURRENT	NOMINAL POWER AT 400 V	MOTOR POWER AT 460 V


		A	kW	hp	A	A	A	A	kW	hp
	0401					1.3	1.9	2.2	0.37	0.5
	0402					1.7	2.5	2.9	0.55	0.75
	0403					2.1	3.1	3.6	0.75	1.0
	0404					3.0	4.5	5.2	1.1	1.5
	0405					4.2	6.3	7.3	1.5	2.0
	1401	2.8	1.1	1.5	3.0	2.1	3.1	3.6	0.75	1.0
	1402	3.8	1.5	2.0	4.1	3.0	4.5	5.2	1.1	1.5
	1403	5.0	2.2	3.0	5.5	4.2	6.3	7.3	1.5	2.0
	1404	6.9	3.0	5.0	7.5	5.8	8.7	10.1	2.2	3.0
	1405	8.8	4.0	5.0	9.6	7.6	11.4	13.3	3.0	5.0
	1406	11	5.5	7.5	12.1	9.5	14.2	16.6	4.0	5.0
	2401	15.3	7.5	10	16.8	13	19.5	22.7	5.5	10
	2402	21	11	15	23	16.5	24.7	28.8	7.5	10
	2403	29	15	20	31	25	34.5	40.2	11	20
	2404					29	43.5	50.7	15	20
	3401	35	18.5	25	38	32	48	56	15	25
	3402	43	22	30	47	40	60	70	18.5	30
	3403	56	30	40	61	46	69	80.5	22	30
	4401	68	37	50	74	60	90	105	30	50
	4402	83	45	60	91	74	111	129.5	37	60
	4403	104	55	75	114	96	144	168	45	75
	5401	138	75	100	151	124	186	217	55	100
	5402	168	90	125	184	156	234	273	75	125
	6401	205	110	150	225	180	231	269	90	150
	6402	236	132	200	259	210	270	315	110	150

575 V drive ratings (500 V to 575 V ± 10 %)

MODEL		NORMAL DUTY				HEAVY DUTY
		MAXIMUM CONT. OUTPUT CURRENT	NOMINAL AT 575 V POWER	MOTOR POWER AT 575 V	PEAK CURRENT	MAXIMUM CONT. CURRENT OUTPUT	OPEN LOOP PEAK CURRENT	CLOSED LOOP PEAK CURRENT	NOMINAL POWER AT 575 V	MOTOR POWER AT 575 V


		A	kW	hp	A	A	A	A	kW	hp
	3501	5.4	3.0	3.0	5.9	4.1	6.1	7.1	2.2	2.0
	3502	6.1	4.0	5.0	6.7	5.4	8.1	9.4	3.0	3.0
	3503	8.4	5.5	7.5	9.2	6.1	9.1	10.6	4.0	5.0
	3504	11	7.5	10	12.1	9.5	14.2	16.6	5.5	7.5
	3505	16	11	15	17.6	12	18	21	7.5	10
	3506	22	15	20	24.2	18	27	31.5	11	15
	3507	27	18.5	25	29.7	22	33	38.5	15	20
	4603	36	22	30	39.6	27	40.5	47.2	18.5	25
	4604	43	30	40	47.3	36	54	63	22	30
	4605	52	37	50	57.2	43	64.5	75.2	30	40
	4606	62	45	60	68	52	78	91	37	50
	5601	84	55	75	92	63	93	108.5	45	60
	5602	99	75	100	108	85	126	147	55	75
	6601	125	90	125	137	100	128	149	75	100
	6602	144	110	150	158	125	160	187	90	125

690 V drive ratings (500 V to 690 V ± 10 %)

MODEL		Normal Duty				Heavy Duty
		MAXIMUM CONT. CURRENT OUTPUT	NOMINAL AT 690 V POWER	MOTOR POWER AT 690 V	PEAK CURRENT	MAXIMUM CONT. CURRENT OUTPUT	OPEN LOOP PEAK CURRENT	CLOSED LOOP PEAK CURRENT	NOMINAL POWER AT 690 V	MOTOR POWER AT 690 V


		A	kW	hp	A	A	A	A	kW	hp
	4601	22	18.5	25	24.2	19	27	31.5	15	20
	4602	27	22	30	29.7	22	33	38.5	18.5	25
	4603	36	30	40	39.6	27	40.5	47.2	22	30
	4604	43	37	50	47.3	36	54	63	30	40
	4605	52	45	60	57.2	43	64.5	75.2	37	50
	4606	62	55	75	68.2	52	78	91	45	60
	5601	84	75	100	92	63	93	108.5	55	75
	5602	99	90	125	108	85	126	147	75	100
	6601	125	110	150	137	100	128	149	90	125
	6602	144	132	175	158	125	160	187	110	150

Inputs and Outputs

FUNCTION	QTY	I/O DEFAULT FUNCTION	RATING
Analog input 1	1	Frequency /speed ref 1	10 V ±
Analog input 2	1	Frequency /speed ref 2	± 10 V(default), 0-20 mA or 4-20 mA
Analog input 3	1	Motor thermistor	± 10 V, 0-20 mA, 4-20 mA or Motor thermistor input (default)
Analog output	2	Speed/frequency Torque (active current)	± 10 V(default), 0-20 mA or 4-20 mA
Digital input	3	Run reverse input Analog input 1/2 select Jog forward input	+24 V
Digital input / output	3	At zero speed output Reset input Run forward input	+24 V
Relay	1	Drive OK indicator	Normally open
Drive enable (Safe Torque Off)	1	Safe Torque Off input	+24 V
+24V External input	1	External 24 V supply	+24 V

Environmental safety and electrical conformance

IP20/Nema 1 rating, IP54 (NEMA 12) through panel mount
Ambient temperature -15 to +40 °C, 50 °C with derating
Humidity 95 % maximum (non condensing) at 40 °C
Altitude: 0 to 3000 m, derate 1 % per 100 m between 1000 m and 3000 m
Vibration: Tested in accordance with IEC 60068-2-34
Mechanical Shock Tested in accordance with IEC 60068-2-27
Storage temperature -40 °C to 50 °C
Electromagnetic Immunity complies with EN 61800-3 and EN 61000-6-2
With onboard EMC filter, complies with EN 61800-3 (2nd environment)
EN 61000-6-3 and EN 61000-6-4 with optional footprint EMC filter
IEC 61000-3-4 Supply conditions
IEC 60146-1-1 Supply conditions
IEC 61800-5-1 (Power Drive Systems)
IEC 61131-2 I/O
EN 60529 Ingress protection
EN 50178 / IEC 62103 Electrical safety
Safe Torque Off (formally secure disable), independently assessed by BGIA to IEC 61800-5-2 SIL 3
EN 81-1 assessed by TÜV
EN 61000-6-2, EN 61000-6-4 EMC, UL508C, UL840

Ratings (up to)

SP0 (1.5 kW)

SP1 (5.5 kW)

SP2 (15 kW)

SP3 (30 kW)

SP4 (55 kW)

SP5 (90 kW)

SP6 (132 kW)

Options

Keypads and parameter storage

	Smartcard A memory device that can be used to back-up parameter sets and PLC programs, and copy them from one drive to another
	SM-Keypad SM-Keypad is a high brightness LED keypad for Unidrive SP (except frame size 0), Mentor MP and Affinity drives
	SM-Keypad Plus SM-Keypad Plus is a multi-lingual, hot pluggable, backlit LCD display

Automation and Motion option modules

	SM-Applications Plus SM-Applications Plus offers high performance programmable logic and motion control together with high speed I/O and CTNet, a high speed Fieldbus
	SM-Applications Lite V2 User programmable logic and motion control module for standalone drive applications or for when the drive is connected to a centralized controller via I/O or Fieldbus
	SM-Register A flexible, high performance solution for programmable motion requiring high speed registration features
	SM-EZMotion This module and Power Tools Pro software provide a user friendly environment for motion programmin

Communication option modules

	SM-CAN User programmable CAN option module, allows the development of CAN protocols
	SM-CANopen CANopen interface supports various profiles including several drive profiles
	SM-DeviceNet SM-DeviceNET option module
	SM-EtherCAT Follower option module, for high performance servo applications
	SM-Ethernet Supports Ethernet/IP and Modbus TCP/IP and can generate emails. Provides high speed drive access, global connectivity and integration with IT network technologies
	SM-Interbus Interbus interface option module
	SM-LON LonWorks interface for building automation applications
	SM-PROFIBUS-DP Follower option module
	SM-PROFINET PROFINET is an Ethernet based industrial network protocol adapting Ethernet hardware and protocols
	SM-SERCOS SERCOS interface Option Module

Input and Output option modules

	CTNet IO Flexible I/O system for remote connectivity with Control Techniques’ SM-Applications Plus and SM-Register option modules
	SM IO 24 V Protected Overvoltage protected I/O module
	SM-IO 120 V Module that provides digital I/O rated to 120Vac
	SM-IO 32 Extended digital I/O, adding 32 digital high speed bi-directional I/O points to the drive
	SM-IO Lite Extended I/O interface with reduced functionality
	SM-IO PELV NAMUR standard I/O interface with high speed I/O
	SM-IO Plus Extended I/O interface to increase the number of I/O points on a drive
	SM-IO Timer Extended I/O option module with real time clock

Feedback option modules

	SM-Encoder Output Plus Incremental encoder input and output option module that enables connection with external motion controllers
	SM-Encoder Plus Incremental encoder input option module
	SM-Resolver Resolver module is designed for robust feedback in demanding environments
	SM-SLM SLM module is designed for integration with SLM enabled motion controllers
	SM-Universal Encoder Plus Additional combined encoder input and output interface supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI encoders

Safety option modules

SM-Safety
SM-Safety module provides an intelligent, programmable solution to meet IEC 61800-5-2 functional safety standard

Software

Control Techniques Windows-based software packages connect using Ethernet, CTNet, Serial or USB connections. Ethernet communications allow the drives to be accessed remotely, anywhere in the world.

Commissioning and monitoring software

	CTSoft - Drive configuration tool for Control Techniques drives CTSoft is a drive configuration tool for commissioning, optimizing and monitoring Control Techniques drives
	CTScope - Real-time software oscilloscope CTScope is a real-time full featured software oscilloscope for viewing and analyzing changing values within the drive

Automation and motion programming software

	SyPTPro - System programming toolkit for drive automation systems SyPTPro provides a full featured programming environment for PLC and motion control onboard Control Techniques AC, DC and servo drives
	SyPTLite - Fast user program editor for Control Techniques drives SYPTLite is a ladder diagram editor allowing users to develop simple programs for Control Techniques drives and option modules
	PowerTools Pro - Advanced motion control programming Advanced motion control programming for Unidrive SP (with the SM-EZMotion module) and Digitax ST-Z drives and Epsilon EP, FM-3E and FM-4E modules

Analysis software

	CT Energy Savings Estimator - Energy optimizing software Il nostro software di calcolo del risparmio energetico consente di analizzare l'utilizzo di energia per varie applicazioni e di calcolare il risparmio sui costi ottenuto con i convertitori a velocità variabile
	CT Harmonic Calculator - Analysis of drive system harmonics CT Harmonic Calculator is a supply harmonics calculator that will help you to economically meet the required standards for your installation

Connectivity software

CTOPCServer - OPC compliant server
CTOPCServer is an OPC compliant server for interfacing your own PC software with Control Techniques drives

More detail about Socos Engineering Sdn Bhd