SR-500

Category: THINKY MIXER (Non Vacuum) Solder Paste Mixer Available
For more information, visit our official website at renetech.com.my

Description

Special purpose machine that can optimize temperature and viscosity preparations and dispersion and deaeration of solder paste at the same time

Feature
Can prepare uniform viscosity in a short time for solder paste just taken from cold storage without bringing it back to room temperature. Metal particles with high specific gravity such as solder particles settle to the bottom of containers in cold storage and cause differences in material viscosity. The SR-500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.

Specification

Unit Dimensions/ Unit weight H390 ×W300×D340(mm) Approx. 18kg
Maximum Capacity*1
*1:Total mass to mount on the cup holder, including materials, containers, and adapters.
680g
Standard Container*2
*2:Contact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
150 ml resin container
Power Supply Voltage: Single-phaseAC 120 V ± 10 %, 50/60 HzPower consumption:Approx. 50 VA (standby)Max 900 VA (operation)
Accessories Instruction Manual × 1,AC cable (including 3P adapter) × 1,150 ml container × 3,Adapter for HDPE 150 ml container × 1(including 1 O-ring)Silicon rubber sheet × 1,O-ring for fine adjustment × 11 metal fitting is attached to the unit rear to release the lid lock, in case of power failure.

More detail about Renetech Sdn Bhd
Renetech Sdn Bhd
Renetech Sdn Bhd Lab Equipment Selangor, Rotary Evaporator Supply Kuala Lumpur (KL), Laboratory Washer Supplier Malaysia ~ Renetech Sdn Bhd
Contact Us flagMalaysia