Fast Ethernet WDM Media Converter

Category: Unmanaged 10/100/1000 Fast Ethernet & Gigabit Autosensing Media Converters Available
For more information, visit our official website at catacomm-corp.com

Description

Description


The AN-UM-130SM-20 & AN-UM-150SM-20 converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.
This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack.
 
Adopting WDM technology, AN-UM-130SM-20 & AN-UM-150SM-20 takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.
 
BiDi WDM – Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts.
 
Converters universal – they can work as standalone modules in point to point applications with external power supply modules – or same converter can be used as a plug in module in AN-CH05 14 slot chassis. Such universal design, made by AD-net saves a lot of money and time to your network planning – you no need thing, how much units you need as standalone and how much units you need as plug in modules in chassis – just order same module and decide later.
 
Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth.
 

Features


Specifications
 

Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance TX1490nm/RX1550nm; TX1550nm/RX1490nm
Technical:
BER: <1E-8
Data Buffer: 128Kb
Power temperature variation: 02mw/
Input Power Range (dBm): 0~-40
Imax: 800mA
Power: 2.5 W
High perfomance ICPLUS IP113C or RTL8306G chipsets based
Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125single-mode, only 1 strand is needed
Maximum distance: 120 km (available ordering options 20/40/60/80/100/120 km)
Input power: IA@+5VDC or 110~260VAC or 48VDC
Dimensions: 95×70×26mm (external power),  95×70×26mm (external power )
Environment:
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 7


 
 



Ordering Information
 

AN-UM-130SM-20
10/100 Base-TX/FX Bridge Converter 20Km SC Connector (TX=1310 nm)
AN-UM-150SM-20
10/100 Base-TX/FX Bridge Converter 20Km SC Connector (TX=1550 nm)
AN-UM-130SM-40
10/100 Base-TX/FX Bridge Converter 40Km SC Connector (TX=1310 nm)
AN-UM 150SM-40
10/100 Base-TX/FX Bridge Converter 40Km SC Connector (TX=1550 nm)
AN-UM130SM-60
10/100 Base-TX/FX Bridge Converter 60Km SC Connector (TX=1310 nm)
AN-UM-150SM-60
10/100 Base-TX/FX Bridge Converter 60Km SC Connector (TX=1550 nm)
AN-UM-130SM-80
10/100 Base-TX/FX Bridge Converter 80Km SC Connector (TX=1310 nm)
AN-UM-150SM-80
10/100 Base-TX/FX Bridge Converter 80Km SC Connector (TX=1550 nm)
AN-UM-130SM-100
10/100 Base-TX/FX Bridge Converter 100Km SC Connector (TX=1490 nm)
AN-UM-150SM-100
10/100 Base-TX/FX Bridge Converter 100Km SC Connector (TX=1550 nm)
AN-UM-130SM-120
10/100 Base-TX/FX Bridge Converter 120Km SC Connector (TX=1490 nm)
AN-UM-150SM-120
10/100 Base-TX/FX Bridge Converter 120Km SC Connector (TX=1550 nm)
 

Additional information


Fast Ethernet 10/100
Any


More detail about Catacomm Corporation Sdn Bhd
Catacomm Corporation Sdn Bhd
Catacomm Corporation Sdn Bhd AD-net AN-FM-RS232 Fiber Modem Sole Distributor Malaysia, Tainet T-336Cx Analog Modem Supplier Selangor, Data Communication & IT Networking Supply KL ~ Catacomm Corporation Sdn Bhd
Contact Us flagMalaysia