Description
Description
The AN-UMG fiber media converter series comply with IEEE 802.3/ab Gigabit Ethernet standard. It isupports two types of media for network connection such as 1000 Base-T to 1000 Base SX/LX and connects these two types of segments to operate smoothly. Converter fits in AD-net media converter chassis as plug in module and can be used in standalone applications as well.
AN-UMG series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa. The 1000Base-T port supports full-duplex Gigabit connection at wire speed with RJ45 connector. The fiber Gigabit connection supports shortwave (SX) or longwave (LX) laser optic with multi-mode or single-mode SC type connector. This converter will give your Copper Gigabit connection the ability to interface with fiber connection over a distance up to 80 km!
AN-UMG dual fiber optical fibre converter is manufactured to provide 1000Base speeds according to your existing 1000Base-TX network. This is also known as a Gigabit network. The converter takes a typical shielded RJ45 connector into a Fiber Optic SC connection to run the distance. You can then use another converter to return the signal into RJ45 to match with the network you are using.
Features
-
Compliant with IEEE 1000Base-T and 1000Base-LX
-
One 1000Base-T RJ-45 port
-
One 1000Base-LX/SX Port w/ SC/ST-Type Connector
-
Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
-
Wall-Mountable
-
Optional 19” system chassis with redundant power supply (AN-CH05), holds up to 14 AN-UMG series Media Converters
-
-
DIP switch allows turn on/off Jumbo Frame support
-
Configurable Store/Forward modes
-
On/Off setting for Pass through mode
-
Smart pass through, Modified cut through modes set by dip switches
-
CE, FCC & RoHs compliant
Specifications
Standarts: IEEE802.3z/ab 1000Base-T 1000Base-SX/LX
LED Indicators: FX LINK, FX FDX, TP LINK, TP FDX, ACT, POWER
Data rate: 2000Mbps full duplex
TP: 1000 FDX with NWAY auto-negotiation
Power supply: 100 to 240VAC 50 to 60Hz
Input power: 2A +5V
Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)
Environment: Relative humidity; 5% to 90%
Operating temperature: 0 to 60
Storage temperature: -20 to 70
Application Scenario:
Ordering Information
AN-UMG-MM-1310
|
Gigabit Ethernet 1000Mbps Media Converter 2 km (1310 nm) SC (Multimode)
|
AN-UMGSM-10
|
Gigabit Ethernet 1000Mbps Media Converter 10km SC (Single Mode)
|
AN-UMGSM-20
|
Gigabit Ethernet 1000Mbps Media Converter 20km SC (Single Mode)
|
AN-UMGSM-40
|
Gigabit Ethernet 1000Mbps Media Converter 40km SC (Single Mode)
|
AN-UMGSM-60
|
Gigabit Ethernet 1000Mbps Media Converter 60km SC (Single Mode)
|
AN-UMGSM-80
|
Gigabit Ethernet 1000Mbps Media Converter 80km SC (Single Mode)
|
AN-UMG-MM-850
|
Gigabit Ethernet 1000Mbps Media Converter 500 m (850nm) SC (Multimode)
|
ST/FC
|
ST SC and AC/DC power options are available
|
More detail about Catacomm Corporation Sdn Bhd