UNIPULSE – Digital Indicator (F331): Top Choice in Melaka, Malaysia, Ayer Keroh Carlssoon Technologies (Malaysia) Sdn Bhd

Description

UNIPULSE – Digital Indicator
Brand: Unipulse
Model: F331

Product Outline:
F331 is a digital indicator for strain gauge sensors to measure load, torque, pressure and displacement. Compact and simple configuration, a practical machine with features such as hold and judgment.

Features:

Judgment function
Upper and lower limit comparison and judgment result output
Output (2 points): Selectable from OK・NG・HH・HI・LO・LL
HOLD function
Hold function with the speed of A/D converting 300 times/sec. (Sample・Peak・Bottom・P-P)
Wealth of interface
USB as a standard feature. BCD output, D/A converter (Current output), RS-485(Select from Modbus-RTU and original format), RS-232C are available as an option.
Special PC application software
We prepared the special software that can easily set up F331, downloading of measured values and analyzing on a PC.

Specifications:

Analog	Sensor excitation voltage	DC2.5V±10%　Output current within 30mA : Standard specification 5V spec. (Please specify when ordering.) (DC5V±10%　Output current within 30mA)
	Signal input range	-3.0 to +3.0mV/V
	Equivalent input calibration range	+0.5 to +3.0mV/V
	Equivalent input calibration error	Within 0.1%FS(at 0.5mV/V input)
	Accuracy	Non-linearity: Within 0.02%/FS(at 3mV/V input) Zero drift: Within 0.5μV/℃ RTI Gain drift: Within 0.01%/℃
	A/D converter	Rate: 300 times/sec. Resolution: 24 bits (binary)
	Hold function	Sample, Peak, Bottom, P-P
	Display	Character height 14.2mm Numerical display (4-digits), by 7-segment red LED
	Indicated value	Numeric 4-digits -9999 to 9999 (Minus is a most significant digit. It display at the status lamp.)
	Decimal point	The display position is selectable. (8.888、88.88、888.8、8888)
	Display items	Status display 3φ red LED ×2 (MINUS, HOLD) 3φ green LED ×1 (OK)
	Display frequency	5, 10, 20 times/sec. selectable
Setting Section	Setting method	Setting by specific PC software with USB interface.
	Preservation of data	Stored in nonvolatile RAM (NOVRAM)
	Key switch	ZERO
	Setting items	Calibration: Zero calibration/ Span calibration (actual load calibration, equivalent input calibration) HH limit, HI limit, LO limit, LL limit, Hysteresis, Digital offset, Near zero, Comparison timing, Moving average filter, Digital low-pass filter*, Hold mode, ZERO key valid/invalid, Display frequency, Decimal place, External output selection, Indicator ID, Loadcell ID, BCD output mode, BCD data update rate, BCD output selection, D/A output mode, D/A zero scale, D/A full scale, RS-485 communication mode, RS-485 I/F setting, RS-485 ID, RS-485 transmission delay time, RS-232C communication mode, RS-232C I/F setting, Setting value LOCK (485/232), Calibration value LOCK (485/232) ※3, 6, 12Hz selectable

For more information please click the link for reference: https://www.unipulse.tokyo/en/product/f331/

More detail about Carlssoon Technologies (Malaysia) Sdn Bhd