KTS-MB81141142ZZZZ Contrast Sensors SICK | Sensorik Automation SB

KTS-MB81141142ZZZZ | Part no.: 1078119

• Communication interface: -
• Teach-in mode: 2-point teach-in, teach-in dynamic
• Light source: LED, White
• Sensing distance: 13 mm
• Switching output: Push-pull: PNP/NPN
• Light spot size: 1.2 mm x 3.9 mm
• Connection type Detail: Male connector M12, 4-pin
• Device type: Standard
• 
  
  

  • Features

    Special applications	Standard
    Device type	Standard
    Dimensions (W x H x D)	26 mm x 62 mm x 47.5 mm
    Sensing distance	13 mm
    Sensing distance tolerance	± 3 mm
    Housing design (light emission)	Rectangular
    Light source	LED, White 1)
    Wave length	400 nm ... 750 nm
    Light emission	Long side of housing
    Light spot size	1.2 mm x 3.9 mm
    Light spot direction	Vertical 2)
    Receiving filters	None
    Teach-in mode	2-point teach-in, teach-in dynamic
    Output function	Light/dark switching
    Delay time	-
    Special features	-
    Delivery status	2-point teach-in
    Parameter presettings	None

    • 1) Average service life: 100,000 h at TU = +25 °C.
    • 2) In relation to long side of housing.

  • Mechanics/electronics

    Supply voltage	10.8 V DC ... 28.8 V DC 1)
    Ripple	≤ 5 Vpp 2)
    Current consumption	< 100 mA 3)
    Switching frequency	25 kHz 4)
    Response time	20 µs 5)
    Jitter	10 µs
    Switching output	Push-pull: PNP/NPN
    Switching output (voltage)	Push/Pull: HIGH = VS - 3 V / LOW ≤ 3 V
    Output current Imax.	100 mA 6)
    Input, teach-in (ET)	Teach: U = 10 V ... < VS
    Input, blanking input (AT)	Blanked: U = 10 V ... < Uv
    Input, fine/coarse (F/C)	Coarse: U = 10 V ... < Uv
    Input, light/dark (L/D)	Light: U = 10 V ... < Uv
    Retention time (ET)	35 ms, non-volatile memory
    Connection type	Male connector M12, 4-pin
    Protection class	III
    Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
    Enclosure rating	IP67
    Weight	68 g
    Housing material	Plastic, VISTAL®
    Optics material	Plastic, COP

    • 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) With light/dark ratio 1:1.
    • 5) Signal transit time with resistive load.
    • 6) Total current of all Outputs.

    
    

    Technical drawings

     

    

    Dimensional drawing KTS Core

    

    Adjustments KTS Core

    

    Connection diagram Cd-380

     

    

    KTS Core - setting of switching threshold (teach-in dynamic)

    

    KTS Core - setting the switching threshold (2-point teach-in)

    

    Sensing distance KTS Core