Fluke FoodPro Infrared Food Thermometer

Fluke FoodPro Infrared Food Thermometer

Category: Fluke Available
For more information, visit our official website at hexoind.com

Description


Key features

Product overview: FoodPro Infrared Food Thermometer
Fluke FoodPro non-contact thermometer provides the first line of defense against improper food handling
The handy Fluke FoodPro pocket infrared safety thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. It provides the first line of defense against improper receiving, storage, and holding temperatures. The highly accurate FoodPro uses infrared technology to quickly read surface temperatures. This allows workers to make rapid and frequent temperature measurements faster than with contact thermometers and without fear of cross contamination. The easy-to-see illumination light shows you the measurement area.
The FoodPro is a great help for:

Specifications: FoodPro Infrared Food Thermometer

Infrared Specifications
Temperature -30°C to 200°C
Accuracy (Assumes ambient operating temperature of 23°C ±2°)
Between 0°C and 65°C: ±1°C
Below 0°C: ±1° ±0.1 degree/degree
Above 65°C: ±1.5% of reading
Response time < 500 ms after initial reading
Spectral response 8-14 microns
Emissivity Pre-set for foodservice applications
Distance to spot size/Optical Resolution (D:S) 2.5:1 @ 90% energy, typical
Typical working range (target illumination) ≈25 mm to 250 mm
Minimum target size 12 mm ø
Illumination to IR channel offset 13 mm
Operational Specifications
Repeatability Within accuracy specifications of the unit
Ambient operating range 0°C to 50°C
Relative humidity 90% (±5%) RH non condensing @ 30°C
Storage temperature -20°C to 60°C
Weight 100 g (with battery)
Dimensions 150 x 30 x50 mm
Power, battery life 1 AA alkaline
Battery Life Alkaline, 10 hours minimum @ 23°C  
Target illumination High brightness LED  
Display resolution 4 digits, 0.2°C  
Displayhold (7seconds) Yes  
LCD backlit display No  
Temperature display 4 digits, 0.2°C resolution  
Maximum temperature displayed No  
Timer No  
Environmental data IP54 sealing (hand-washable, non-submersible)  
Other Specifications  
Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)  
Certifications CE NSF  
Warranty 2 years  
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.  
 




More detail about Hexo Industries (M) Sdn Bhd
Hexo Industries (M) Sdn Bhd
Hexo Industries (M) Sdn Bhd Measuring Instruments Supplier Malaysia, Leak Detection Systems Supply Penang, Power Tools Supplies Singapore, Indonesia ~ Hexo Industries (M) Sdn Bhd
Contact Us flagMalaysia