Description
Description
AD-net Technology GEPON range offers combination of simplicity of Ethernet with bandwidth capacity of fiber to enable cost-effective, high-speed transport. Multiple services on one platform, no expensive over-build in last mile network.
AD-net GEPON offers classical Point-to-multipoint topology with splitter without field power requirement, which gives a least CAPEX for new fiber FTTH/FTTB networks layout. You can use this OLT in almost any FTTx network strategy and scenario.
AD-net GEPON offers a real future-proof access network with flexiblilty and upgrade capability.
Interoprating with one of models of AD-net ONU’s (Optical Network Units), it makes a end-to-end solution, reaching as well as end user to offering high speed Internet, IPTV or any other IP based services over PON infrastructure.
OLT has built in routing/switching capabilties it can be integrated easily in operators exiting core infrastructure. One GEPON OLT can deliver a gigabit of symmetrical payload distributed to up to 64 ONUs per each PON port up to twenty kilometers away, to build up a future-proof network without field power requirements.
AN-E-OLT8000 GEPON OLT uses modular scalable design and all modules – including all of power supply, heat dissipation fan, dust screen, PON uplink cards, control cards and other are plug-in type in mainframe chassis. AN-E-OLT8000 main chassis consists of 2 power supply, fan and chassis itself, where you can start plug in modules.
Full configuration of AN-E-OLT8000 GEPON OLT is as follows:
– AN-E-OLT8000 main chassis – 1 unit
– Fan Module – 1 unit
– Dust screen – 1 unit
– Power supply – 2 units
– Control card – 1 unit
– PON 2 port uplink card – up to 4 units
– PON tranceiver modules – up to 8 units, to be installed in 2 PON port cards.
Features
-
Segregation and aggregation fast Ethernet service(10/100BaseT) in both upstream and downstream directions from large METRO pipes of GE, allowing smooth integration to different types of METRO gear
-
Dynamic Bandwidth Allocation(DBA) and quality of service allow the subscribers to share the 1Gbps and get more bandwidth than their agreements.
-
RSTP function guarantees seamless connection between OLT and METRO.
-
Enhanced IGMP features allow the point-to-multipoint video transmission.
-
Rich set of Operations Alarms and Monitoring(OAM) functionality including loopbacks, alarms, performance monitoring and error testing. CLI and GUI supported make it easy to use.
Specifications
System Capacity
-
wire-speed switching 64K MAC list
-
4094 VLANs
-
Max 4 PON uplink cards, each having 2 PON uplink ports – total capacity – 8 ports
-
Max 8 GE interface ports as SFP slots. Any standard 1.25 G SFP module can be used.
-
Max 64 ONUs support per PON port
MAN Interface
More specifications:
-
1 Gbps transmission rate
-
Network reach: 20 km
-
Transmitter power: 2.5dbm to 7 dbm
-
Receiver sensitivity: <=-39dBm
-
Security: ONU authentication
-
Distance 20 km
-
Max 64 ONUs support per PON expansion module
-
Supports 802.3 MPCP protocol;
-
Supports 802.3 OAM and expanded (slave port) protocol, have abundant OAM function design and offers long distance managment through OLT.
-
Double channel independent OLT;
-
Remote software upgrade supported
-
Data encryption service for downlink, secure data transtion security for end users
-
ONU authentication, averts illegal ONU access to network
-
DBA dynamic bandwidth allocation
-
Single ONU multi LLID registration
-
IGMP proxy supported
-
ACL functions supported
-
QoS dunctions supported
-
4K MAC adress with single channel OLT
-
VLAN’s devided by LLID
-
Suitable for FTTH, FTTB and FTTx
-
Loads of various statistic information
-
Hot swap possibility for cards
-
Managed by SNMP/Friendly GUI/Telnet
Dimensions
Operation Environment
Power
-
-48V DC
-
120~240V AC, broaden compliant
-
DC and AC concurrency for protection
-
Power consumption: Max 70W
-
Flexible and user friendly NMS system:
Application Scenarios For FTTH & FTTB FTTx Networks:
Triple Play FTTH & FTTx Scenario
Ethernet Distribution FTTH Scenario
Ordering Information
|
AN-E-OLT8000-C
|
GEPON OLT CHASSIS – 2 power supply cards at backplane (can be AC or DC), can have up to 8 PON PX-20 ports (connected to splitters and ONU) and up to 8 SFP type slots for downlink (to router, switch).
|
|
AN-8000-M
|
Main control card for modular OLT – supports, SNMP MIB, EMS system and control functions (must be inlcuded in each chassis).
|
|
AN-8000-2PON
|
2 PON uplink card, with 2 slots for AN-1000BASE-PX-20 modules. Each chassis can have up to 4 such cards, so full configuration of 8 ports are achieved.
|
|
AN-1000BASE-PX-20
|
1 port PON transceiver module PX-20 (minimum 1 per each OLT, maximum – 8). Distance 20 km.
|
More detail about Catacomm Corporation Sdn Bhd
Malaysia
