ARC Series (Automation)

The ARC/HRC Ball Type Linear Guide Series use four rows of re-circulating steel balls arranged in O-shaped and at 45º contact angle with the raceway, achieving superior load capacity and trackrail rigidity. The use of larger steel balls in greater quantities helps increase the load capacity, moment capacity and rigidity. Reduced lubrication requirements for environmental soundness and maintenance cost saving.

The internal PU lubrication storage pad design allows direct contact of the lubricant with all steel balls without adding extra length to the runner block. This ensures effective long-term lubrication for environmental soundness and maintenance cost saving. Excellent performances are achieved with short stroke applications. Built-in lubricant storage and supply system.


Our standard seals are in direct contact with the rail surface, giving them increased dustproof and lubcrication retenion capabilities. CPC recommends this class of seal for blocks that operate in environments high in foreign particles, such as sawdust, for long periods of time.  S-type seals will have a compratively higher friction then B-Type seals. Dustproof design

• Lubricant injection/replenish in all directions
• Dust protection using double-wipe- blade end seals, standard and reinforced types
• Corrosion resistant surface
• Equal load capacity in all directions
• Both downward-bolt and upward-bolt track rails available
• High rigidity structure