|
TYPE |
Capacitance Type Level Switch |
|
|
|
|
PRINCIPLE |
When the measured substance with a consistent relative dielectric constant fills up between the metal type tank connected to the earth pole and the measured pole, the device detects the changed static capacity value(C) between the measured pole and the earth pole. It was designed to automatically calibrate with just one adjustment, regardless of the relatively dielectric constant.
-Obtained the EM Mark of the
Technology Standard Office. |
|
|
|
|
RANGE |
•Standard : 250mm
•Optional : Rod Type - within 500mm
Wire Type : Within 5000mm |
|
|
|
|
TEMPERATURE |
•Standard : -20℃∼80℃
•Optional : -20℃∼230℃ |
|
|
|
|
|
|
|
|
FEATURES |
•Successful task jointly performed
with the Korea Research Institute
of standards
•Applicable to fluids, powders &
fine powders
•The materials and format of the
detecting part can be selected
according to the various measured
substances
•The attached substances' static
power generator (substance)
measurable
•Automatic control function
embedded
•Explosion proof type possible
(Ex d ⅡB T4) |
|
|
|
|
OUTPUT |
•1 DPDT
•Contact capacity : 5A 250V AC |
|
|
|
|
POWER SUPPLY |
110/220V AC, 50/60Hz |
|
|
|
|
APPLICATION |
•Water, Oil, Chemical substance,
Paint, Sludge tank
•Measurement of the water and oil's
interface
•Cement, Sugar, Barley, Grains,
Resin, Resin Powder, Chip, Ore,
Coal, Slaked lime silo, etc. |
|
|
|
|
REMARK |
Mat'l : 304/316SS (PTFE Tubing) |
|
Malaysia
