Rapeseed Dryer: Top Choice in Kedah, Malaysia, Alor Setar KP Hoe Electrical Sdn Bhd

Description

CPR-165
FEATURES：

Particular design for drying section to optimize both of even drying and efficiency.
Giant drying section, speedy drying, power saving, premium quality of grains.
Spreader device and rotary valves control measurable loading capacity in circulating,and make grains with even drying.
Max. thermal energy, drying rate increase, better quality and quantity, minimum cost.
Safety operation monitor system: Motor overload protection, control fuse, full load buzzer, air pressure switch, flame sensor, over heat sensor, over drying safety device in CS-R.

Model			CPR-165-105	CPR-165-135	CPR-165-150	CPR-165
Capacity (kg)	Pulses, Corn (1liter=690g)		7500~10400	7500~13350	7500~14850	7500~16350
	Rapeseed (1liter=690g)
	Wheat (1liter=680g)
	Paddy (1liter=560g)		6500~10400	6500~10850	6500~12050	6500~13250
Dimension	Length (mm)		4287
	Width (mm)		2745
	Height (mm)		7227	8449	9060	9671
Net weight(kg)approx.			2815	2990	3075	3170
Burner	Type		Gun type
	Max. Combustion		25 liter/hr
Heat Source			Kerosene or Premium diesel
Power Consumption			3P, 220V/380V/415V/440V, 50/60Hz
			6.45 kW
Function	Loading	Pulses, Rapeseed	44 min (approx.)	50 min (approx.)	55 min (approx.)	60 min (approx.)
		Paddy	50 min (approx.)	60 min (approx.)	66 min (approx.)	72 min (approx.)
	Discharging (Pulses, Rapeseed, Paddy)		45 min (approx.)	55 min (approx.)	60 min (approx.)	66 min (approx.)
	Drying Rate	Commercial, Grains	0.5~1.2%/hr
		Seed	Rapeseed 0.1~0.5%/hr Paddy, Wheat 0.2~1.0%/hr
Safety Devices			Thermo-over realy, Air pressure switch, Full load buzzer, Timer, Control fuse, Flame sensor, Over heat sensor.

※Listed parameters and drying rate are for reference only and in accordance to grain with initial and target moisture content as following: pulses: 18% to 13%, paddy: 26% to 15%, wheat and corn: 30% to 12.5%. Actual value varies in correlation to ambient temperature, relative humidity, grain variety, hot air temperature, moisture content before and after drying.
※The specification and graph is for reference only. Actual specification of SUNCUE product shall be based on the Sales Confirmation which customers sign and delivered products.
※Specification subject to change without notice.

More detail about KP Hoe Electrical Sdn Bhd