We are the Leading Supplier of Stainless Steel SUS316Ti.
SS316Ti Austenitic Stainless Steel is a titanium-stabilized version of SUS316 molybdenum-bearing austenitic stainless steel.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply Stainless Steel 316Ti (SUS316Ti , SS316Ti) Round Bars , SUS316Ti / SS316Ti Plates and Sheets.
SUS316Ti Austenitic Stainless Steel is a titanium-stabilized version of SUS316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The SUS316 alloys offer excellent resistance to general corrosion and pitting/crevice corrosion, which is better than the conventional chromium-nickel austenitic stainless steels such as SUS304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature.
SUS 316 stainless steel can be susceptible to sensitization – the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500 °F (425 to 815 °C) – which can result in rapid corrosion. Reduced carbon SUS316L is resistant to sensitization; however, extended exposures in this temperature range will eventually result in sensitization of even the low carbon grade. Resistance to sensitization is achieved in SUS316Ti with titanium additions to stabilize the structure against chromium carbide precipitation, which is the source of sensitization.
This stabilization is achieved by an intermediate-temperature heat treatment, during which the titanium reacts with carbon to form titanium carbides. This significantly reduces susceptibility to sensitization in service by limiting the formation of chromium carbides. Thus, the alloy can be used for extended periods at elevated temperatures without compromising its corrosion resistance.
| JIS G4304 (SUS 316Ti Stainless Steel Plates and Round Bars) | Elements (%) | ||||||||
| C (≤) | Mn(≤) | P (≤) | S (≤) | Si (≤) | Cr | Ni (≤) | Mo | Ti | |
| 0..8 | 2.00 | 0.045 | 0.030 | 1.50 | 16.00 - 18.00 | 10.00 - 14.00 | 2.00 - 3.00 | 5*C+N Min | |
| Tensile Strength , MPa | Yield Strengh , MPa | Elongation , % | Hardness , HRB |
| 520 min | 205 min | 40 min | 90 max |
Malaysia
