Description
The P7000 drives offer unsurpassed system smoothness, functionality, performance and innovation. Available for AC(P70360) or DC(P70530) operation, these microstepping drives are designed to power 2-phase NEMA stepper motors. They offer unique features that are ideal for single or multi-axis applications requiring high-speed performance or low-speed smoothness.
FEATURES
P70360 AC Stepper Drives:
-
P70360-SD:
Conventional step and direction interface
Dedicated inputs for jog+/-, enable and step/direction control
User-provided pulse train to rotate the motor
-
P70530-PN adds to the base drive:
Indexing capability, allowing up to 63 independent, programmable moves
Modbus RTU compatibly
-
P70360-R4 adds to the base drive:
Indexing capability, allowing up to 63 independent, programmable moves
Modus RTU compatibly
Adds an RS-485 interface
-
Integral power supply
-
Input voltage: 120 to 240 VAC (1 phase, 50/60 Hz) for a broad range of power sources
-
Continuous current: 2.5 Amps; microstep peak current: 3.5 Amps
-
Max shaft power: 525 W
-
Speed range: 0 to 50 rev/sec
-
Motor inductance: 50 to 200 mH (320 VDC BUS), 7 to 30 mH (160 VDC BUS)
-
9 programmable inputs
-
Easy-to-use graphical interface
-
Open loop stall detection
P70530 DC Stepper Drives:
-
P70530-SD:
Conventional step and direction interface
Dedicated inputs for jog+/-, enable and step/direction control
User-provided pulse train to rotate the motor
-
P70530-PN adds to the base drive:
Indexing capability, allowing up to 63 independent, programmable moves
Modus RTU compatibly
-
Input voltage: 20 to 75 VDC
-
Continuous current: 5 Amps; microstep peak current: 7.1 Amps
-
Max shaft power: 300 W
-
Speed range: 0 to 50 rev/sec
-
Motor inductance: 2 to 15 mH
-
9 programmable inputs
-
Easy-to-use graphical interface
-
Open loop stall detection
Benefits:
-
Ideal solution for single or multi-axis applications that require high-speed performance or low speed smoothness
-
9 programmable inputs, available indexing model and easy-to-use graphical interface simplify configuration for complex machine requirements
-
Integral stall detection eliminates the need for expensive external sensors or feedback, reducing system cost by up to 30%
-
Multistepping™ feature inserts fine micro-steps to smooth coarse low speed motion without having to redesign machine control architecture
-
Mid-band anti-resonance control reduces negative effects of mechanical resonance, allowing you to get more out of a smaller motor and virtually eliminating nuisance stalls and machine downtime
-
Dynamic smoothing quasi-S-curve algorithm reduces jerk, especially upon acceleration, increasing mechanical life and reducing energy consumption
More detail about IKA AUTOMATION SDN BHD
Malaysia
