Description
We are the Supplier of H13 Tool Steel.
AISI H13 (1.2344, SKD61) Hot Work Tool Steel air hardening, with good toughness, resistance to abrasion and high red hardness.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply H13 (2344, SKD61 Tool Steel) Round Bars / Rods / Shafts , H13 Plates.
H13 Steel Suppliers - 1.2344, SKD61, 8407 Tool Steel
AISI H13 Hot Work Tool Steel air hardening, with good toughness, resistance to abrasion and high red hardness. It resists softening to 550°C and has good resistance to heat checking. Will Nitride with a case hardness over 1000 V.P.N. Generally supplied annealed to HB 230 max.
Applications of 2344 Steel
H13 Tool Steel can use for Hot punches and dies for blanking, bending, swaging and forging, hot extrusion dies for aluminium, cores, ejector pins, inserts and nozzles for aluminium, tin and lead die casting.
Chemical Compositon of SKD61, 8407 Steel
|
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
|
0.37 to 0.42 |
0.80 to 1.20 |
≤ 0.50 |
4.80 to 5.50 |
1.20 to 1.50 |
– |
0.80 to 1.20 |
H13 Tool Steel is also equivalent to
Mechanical Properties of AISI H13 Steel
|
Properties |
Metric |
Imperial |
|
Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) |
1200 – 1590 MPa |
174000 – 231000 psi |
|
Tensile strength, yield (@20°C/68°F, varies with heat treatment) |
1000 – 1380 MPa |
145000 – 200000 psi |
|
Reduction of area (@20°C/68°F) |
50.00% |
50.00% |
|
Modulus of elasticity (@20°C/68°F) |
215 GPa |
31200 ksi |
|
Poisson’s ratio |
0.27-0.30 |
0.27-0.30 |
Machinability
Machinability of H13 is medium to good. It rates as 75% that of the W group water hardening tool steels which are low alloy and of generally good
Heat Treatment
Preheat to 1500 f and then heat to 1850 F. Hold at 1850 f for 15 to 40 minutes and then air cool (air quench).
Tempering each time.
Temper at 1000 F to 1200 F for Rockwell C of 53 to 38. It is advisable to do a double temper by repeating the process and use 1 hour at temperature
Hardening
May refer to “Heat Treating” and “Tempering”.
Our Sales & Supplier Network
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
OUR MOTTO : ” WHY BUY A FULL BAR OR SHEET WHEN YOU JUST NEED A SMALL VOLUME?
Our specialty is to provide wide range of alloy steel with no minimum order.( no MOQ )
More detail about E STEEL SDN. BHD.
Malaysia
