Fluke 80I-110S AC-DC Current Probe, 100A dc, Max Current 100A ac CAT II 600 V, CAT III 300 V

Fluke 80I-110S AC-DC Current Probe, 100A dc, Max Current 100A ac CAT II 600 V, CAT III 300 V

Category: Clamp Meters Available
For more information, visit our official website at elsotech.com.my

Description

The Fluke AC/DC probe that can be used to measures current up to 100A (AC/DC). It is compatible with any Fluke ScopeMeter® test tools, power harmonics analyser, oscilloscope, multimeter or other voltage measurement devices. The specially designed built-in safety features such as the 600Vrms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems this probe is shielded for high noise immunity to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. It is used in clamp meters.

Features and Benefits

Current ranges are 0 to 10ADC or ac peak and 0 to 100A dc or ac peak
Output signals are 10A range: 100mV/A and 100A range: 10 mV/A
Temperature coefficient is 2000 ppm/°C maximum for temperature from 0 °C to 50 °C
Output cable: length is 1.6m
Maximum jaw opening: is 12.5mm
40A to 80A +/-12% of reading +50mA
80A to 100A +/-15% of reading
Operating temperature ranges between 0°C and 50°C
9V battery ( IEC 6LR61)
Battery indicator (ON)
Overload indicator (OL)

More detail about ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd Test & Measurement Equipment Distributor Penang, Malaysia, NetAlly, Rigol, Cromwell Distributor Singapore, Selangor, KL, Sarawak ~ ELSO Technologies Sdn Bhd
Contact Us flagMalaysia