Our Firepro Ablative Coated Batts are manufactured by spraying high-density rockwool with a fire-rated ablative coating. The coated batts are simply cut and friction fitted between the services and the edges of the structure. The fire rated coating is used as an adhesive to bond sections of batt together into a barrier and to the surrounding structure. All joins in the batt are pointed in with FirePro Acoustic intumescent Sealant to form a monolithic layer. The ablative coated batt comes in 6 pieces per pack.
*Plastic pipework would be needed to be sleeved with the FirePro Firestop Pipe Collars prior to installation of the FirePro Ablative Coated Batt. These must be mechanically fixed with steel angles, minimum 30mm x 30 mm x 1.6mm, or similar to the surrounding substrate.
Product Features and Application
Up to 4 hours of fire rating
Simple installation
Lightweight
Maintenance Free
Tested to Rw 57
Resist the passage of smoke
Suitable to make good around most types of servce penetrations
Service Penetration
Integrity
Insulation
Numberof Layers
Concrete floor openings
4 hours
*4 hours
Single
Masonry floor openings
2 hours
*2 hours
Single
Gypsum board wall openings
1 hour
*1 hour
Dual
*Services do not achieve insulation
Minimum thickness of masonry wall - 100 mm
Minimum thickness of concrete floor - 150 mm
Minimum thickness of gypsum wall - 100 mm
Delta Sama Jaya Sdn BhdSubstations Manufacturer Malaysia, Cable Slabs Supplier Kuala Lumpur (KL), Earthing Accessories Supply Selangor ~ Delta Sama Jaya Sdn Bhd