TSURUGA MODEL NRP-60H/NRP-60HL

Specification / Model			NRP-60H NRP-60HL	NRP-83H NRP-83HL	NRC-100H NRC-100HL	NRC-120H NRC-120HL
NRP - □ □ (Front panel : Plastic)     ① ②   ① Size 60 83   ② Setting HL H NRC - □ □ (Front panel : Glass)     ① ②   ① Size 100 120   ② Setting HL H
H : High value setting, relay contact output HL : High and Low value setting, relay contact output
Dimension (mm)	60(W)×60(H)		●	-	-	-
	83(W)×83(H)		-	●	-	-
	100(W)×83(H)		-	-	●	-
	120(W)×100(H)		-	-	-	●
Weight (1 mA d.c. rated)			approx. 230 g	approx. 530 g	approx. 550 g	approx. 600 g
Type	Square
Input (*)	DC Current	(Moving coil)	500 μA 1mA 10 - 100 mA	100 μA, 500 μA, 1 mA, 10 mA to 5 A
	DC Voltage	(Moving coil)	1V - 300V
	Receiver	(Moving coil)	4 to 20 mA, 1 to 5 V (4 kΩ), 1 to 5 V (1 MΩ with 7331)
	AC Current	(average)	1 - 20 mA	1 - 300 mA
		(r.m.s., 1 A or more)	1 to 5 A（CT incorporated）,　10 to 30 A (with 7311)
	AC Voltage	(average)	10 - 300 V
Display	Accuracy	Class 1.5	-	●	●	●
		Class 2.5	●	-	-	-
	Scale length		46mm	67mm		88mm
	Scale divisions	20 - 37.5	●	-	-	-
		30 - 50	-	●	●	●
	Scale Pointer		Needle type, black
	Scale plate color		White
	Cover color	Black	●	●	●	●
		7.5BG4 / 1.5	-	○	○	○
Output	Optical operation		●	●	●	●
	Output		Hold (relay)
	Pointer		Knife shape H (High) : Red, L (Low): Green
	Setting range		0 – 100 % of scale for H and L
	Setting		HL (High / Low) or H (High)
	Minimum setting range (*2)		Less than 5 %
	Pick up accuracy (*2)		Less than 1.5 %	Less than 1.0 %
	Deadband (*2)		Less than 0.5 %
	Temp. coefficient (*2) (pick up value at 23°C ± 10°C)		Less than 0.3 %
	Power regulation (pick up value at rated voltage ±10%)		Less than 0.3 %
	Output contact		1 transfer for H and L
	Contact rate (load resistance)		250 V, 2 A a.c. 220 V, 2 A d.c.	250 V, 3 A a.c. 30 V, 3 A d.c.
	Power on delay		-	○	○	○
100/110,200/220 V AC			●	●	●	●
24 V DC			○	○	○	○
Power consumption			Less than 1.5 VA	Less than 2.5 VA
Operating temperature			0 to 50°C
Operating humidity			30 to 90% RH (no condensation)

*1

When the rated input exceeds the specific standard, accessory is included with product.

*2

It is the value against the scale length.

●：Standard, ○：Option

Customers are requested to provide the following information during order.

1. 1. Model ( HL or H )
2. 2. Rated value (Input signal with AC or DC type)
3. 3. Scale and Unit
4. 4. Power supply
   ・AC 100/110 V ± 10% or AC 200/220 V ± 10% ( 50/60 Hz )
   ・DC 24V ± 10%