Transducer
TSURUGA MODEL 7592
TSURUGA MODEL 7592

 

TSURUGA MODEL 7592

TECH IMPRO AUTOMATION SOLUTION SDN BHD flag
Category: Transducer Available
For more information, visit our official website at improtechonline.com
Visit Official Site Contact Us
Description

D/A Transducer

D/A Transducer with Scaling Function

Model Designation

7592 - □ - □ - □
    ①   ②   ③
① Input Signal
Code Input Signal
1 14 bit with polarity
2 4 digits BCD with polarity
③ Power Supply Voltage
Code Power Supply Voltage
3 AC 100 V(90 to 132 V)
5 AC 200 V(180 to 264 V)
9 DC 24 V ± 10%
② Output Signal
Code Output Signal
01 DC 0 to 10 mV
02 DC 0 to 100 mV
03 DC 0 to 1 V
04 DC 0 to 5 V
05 DC 0 to 10 V
09 DC 1 to 5 V
00 Except above DC voltage output
(10 mV to 10 V)
13 DC ±1 V
14 DC ±5 V
10 Except above DC ±voltage output
(±10 mV to ±10 V)
* During DC Power: Less than ±5 V
23 DC 0 to 1 mA
29 DC 4 to 20 mA
20 Except above DC current output
(100 µA to 20 mA)

Input Specifications

Input signal No voltage contact or open collector, TTL level
IIL ≦ -1 mA, L = 0 - 1.0 V, H = 3.5 – 5 V
Polarity input (POL)
Polarity logic is positive : + polarity　 　 “H” level
- polarity 　“L” level
Polarity logic is negative : + polarity　　 “L” level
- polarity 　 “H” level
Over range input (OVER) Polarity logic is positive (over): 　“H” level
Polarity logic is negative (over): 　“L” level
Hold input (HOLD) The output is held by connecting pin with COM and making it “L” level.
Synchronization signal (SYNC) Make an input of synchronized negative pulse when the width is more than 1ms. It captures the pulse raising data.

Output Specifications

Output Signal Output Impedance Tolerable Load Resistance
DC 0 to 10 mV Approx. 10 Ω More than 10 kΩ
DC 0 to 100 mV Approx. 100 Ω More than 100 kΩ
DC 0 to 1 V Less than 0.1 Ω More than 100 Ω
DC 0 to 5 V More than 500 Ω
DC 0 to 10 V More than 1 kΩ
DC 1 to 5 V More than 500 Ω
DC ±1 V
DC ±5 V More than 2.5 kΩ
DC 0 to 1 mA More than 5 MΩ 0 to 15 kΩ (During DC power: 0 to 10 kΩ)
DC 4 to 20 mA 0 to 7500 Ω (During DC power: 0 to 500 Ω)

General Specifications

Allowance ±0.15% of SPAN at 23°C
Resolution
Input signal 1 : 1/16384
2 : 1/10000
3 : 1/360
Response Approx. 20ms(0→90%)
Less than 0.2s (0→90%)in case of internal synchronization
Temperature coefficient ±150 ppm/°C
Output adjustment range ZERO：More than ± 3% of SPAN
SPAN：More than ± 5% of SPAN
Insulation resistance Between input terminals and output terminals: DC 500 V　More than 100 MΩ
Withstand voltage
Between input terminals and power supply terminals
AC 1500 V 1min. (During DC power: AC 1000 V 1min.)
Between input terminals and output terminals
AC 1500V 1min. (During DC power: AC 1000 V 1min.)
Between all terminals and external case AC 1500 V 1min.
Power supply voltage
AC 90 to 132 V　50/60 Hz : Less than 6 VA
AC 180 to 264 V  50/60 Hz : Less than 6 VA
DC 24 V ± 10% : Less than 100 mA
Operating temperature -5 to 55°C
Storage temperature -20 to 70°C
Weight Approx. 370 g(AC) / Approx. 210 g(DC), Socket： Approx. 70 g

More detail about TECH IMPRO AUTOMATION SOLUTION SDN BHD
TECH IMPRO AUTOMATION SOLUTION SDN BHD
TECH IMPRO AUTOMATION SOLUTION SDN BHD Industrial Automation Supplier Malaysia, Flow Meter Supply Penang, Pressure Transmitter Supplies Butterworth ~ TECH IMPRO AUTOMATION SOLUTION SDN BHD
Contact Us flagMalaysia