・TC80-D3V is a compact DIN-rail mount torque converter
・High-speed sampling of 16kS / s visualizes steep torque fluctuations.
・It also supports the UTM series rotary encoder option!
・3ch analog output torque, rotation speed, and angle.
・Up to 100 saved hold values can be output as data.
Light weight & compact body for 35mm DIN rail mount
With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.
Analog sectionDisplay sectionExternal signalInterfaceGeneral performanceAttachments
| Analog section | |
| Signal input range |
-10 to +10V (UTM/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTM/UTMV) Input impedance: 1MΩ or more |
|---|---|
| Accuracy |
Non-linearity within 0.02%FS±1digit Zero drift within 0.2mV/ RTI Gain driftwithin 0.01%/ |
|
Digital low-pass filter |
PASS,1 to 1kHz |
| A/D converter |
Rate 16000times/sec Resolution24bit (binary)Approx. 1/30000 against 10V |
|
Analog monitor output (Test point / UTF Option) |
Transmitted input voltage |
| Pulse input for rotation speed (open collector input/UTM/UTMV/UTM) | |
| Max. rotation speed | Depend on UTM/ UTMV/ UTM |
| Min. rotation speed |
Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr) |
| Min. pulse width | 50μs |
|
Circuit configuration |
No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA) |
| Rotation speed input for low speed(Pulse input, open collector) | |
| Maximum input frequency | Approx. 1000rpm |
| Minimum input frequency | 0.1rpm |
| Minimum detection pulse width | 5μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (IcApprox. 10mA) |
|
Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option) |
|
| Max. frequency | Depend on UTF |
|
Circuit configuration |
Line driver (RS-422A compliant) |
| Encoder input(Pulse input) | UTM/UTM Compatible with rotary encoder option |
|---|
| Display section | |
| Display unit |
Character height 8mm Numerical display by 7-segment green LED |
|---|---|
| Display content |
Switchable numeric display (torque, rotation speed, Power/ Angle) |
| Display frequency | Selectable from 1, 3 , 6, 13, 25 times/sec. |
| External signal | |
| Output signal (2) |
Selectable/ configurable Transistor’s open collector output Vceo=30V Ic=50mA |
|---|---|
| Input signal (1) |
Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal |
| Interface | |
| USB | USB Interface |
|---|---|
| D3V | D/A converter voltage output(3ch) |
| 485 | RS-485 Interface |
| 422 | RS-422A Interface (UTF Option) |
| General performance | |
|
Power supply voltage |
DC24V ±15% |
|---|---|
| Power consumption | 6W typ. |
|
Operating conditions |
Temperature: Operating temperature range: -10 to +50, Storage temperature range: -20 to +85 Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 230g |
| CE marking certification | EMC directives EN61326-1 |
| Attachments | |
| Quick manual | 2 |
|---|---|
| Mini driver | 1 |
| Various I/O connector | 3 |
| Operating tool | 1 |
|
Product catalogue(PDF)
|
TC80 catalogue(862 KB) | |
|---|---|---|
Malaysia
