Thrust force and Torque are measured simultaneously.
Rated Output is adjusted at ±5V
in both Mz and Fz direction.
Just connect a sensor and apply 24V to it, then adjusted voltage will be outputted simultaneously.
Any calibration settings are not required.
| Model | Sensor : URT-20-5K Amplifier : FS200 |
|---|---|
| Rated capacity | Mz : ±20Nm Fz : 5kN |
| Power supply voltage | DC24V±15% |
| Consumption current | 150mA or less |
| Load signal output | Mz, Fz : ±5V |
| Load resistance | 2kΩ or more |
| Response | 2kHz |
| I/O signal |
Input: Auto zero command Output: Auto zero response |
| Safe overload | Mz : 500%FS Fz : 400%FS |
| Non-linearity | Mz : 0.1%FS typ. Fz : 0.5%FS |
| Hysteresis | Mz : 0.1%FS typ. Fz : 0.5%FS |
| Repeatability | Mz : 0.1%FS typ. Fz : 0.5%FS |
| Cross talk |
Mz(20Nm) → Fz:0.05kN or less Fz(5kN) → Mz:0.2Nm or less |
| Compensated temp. range | 0 to +40℃ |
| Safe temp. range | －10 to +50℃ |
| Temp. effect on zero | 0.1%FS/℃ |
| Temp. effect on span | 0.05%FS/℃ |
| Sensor material | Stainless steel |
| Weight |
Sensor：Approx. 250g, Amplifier：Approx. 180g （Excluding the cable） |
＊Above specifications are achieved when the sensor(URT-20-5K) is connected with the dedicated amplifier(FS200).
＊Accuracy is not guaranteed in the range of Fz 0 to -5V.
|
Product catalogue(PDF)
|
URT-20-5K catalogue(480 KB) | |
|---|---|---|
Malaysia
