YSI EXO3 Multiparameter Sonde

YSI EXO3 Multiparameter Sonde

Category: YSI Available
For more information, visit our official website at hsa-asia.com

Specifications
  • EXO3 MULTIPARAMETER SONDE MULTIPARAMETER WATER QUALITY SONDE (5 SENSOR PORTS, INCLUDING A CENTRAL WIPER PORT): Connectivity / Communications Sonde: Bluetooth wireless technology, RS-485, and integral SDI-12 Output Options with Adapters: USB, RS-232, or Modbus Depth Rating 0 to 250 m (0 to 820 ft) Desktop Software Compatible KorEXO Flow Cell Yes Medium Fresh, sea or polluted water Memory 512 MB total memory; >1,000,000 logged readings Monitoring Yes Multiparameter Yes Operating Temperature -5 to 50 °C (23 to 122 °F) Power 2 Alkaline Batteries Sampling Yes Size Diameter: 7.62 cm (3.00 in) Length: 58.67 cm (23.1 inc) Smart Sensors / Ports 5 sensor ports (4 ports available when central wiper in use) Peripheral ports: 1 power communication port Storage Temperature -20 to 80 °C (-4 to 176 °F). Exception: 0 to 60 °C (32 to 140 °F) for pH and pH/ORP sensors User Calibratable Yes Waterproof Yes Weight 2.00 kg (4.41 lbs) with a full payload of 4 probes, 1 wiper, and probe guard installed Battery Life 90 days* Communications Computer Interface: Bluetooth wireless technology (between sonde and handheld or computer with KOR software), USB Output Options: USB with signal output adapter (SOA); RS-232 & SDI-12 with DCP-SOA. Diameter 7.62 cm (3.00 in) Length 71.10 cm (28.00 in) Peripheral Ports 1 power communication port; 1 auxiliary port for third-party sensors (future functionality; not active yet) Sample Rate Up to 4 Hz Sensor Ports 7 (6 ports available when central wiper used) Warranty: 3 yrs Sonde; handheld Warranty: 2 yrs Cables; conductivity/temperature and optical sensors; electronics base for pH, pH/ORP, ammonium, chloride, and nitrate sensors Warranty: 1 yr Optical DO cap and replaceable reagent modules for pH and pH/ORP sensors Warranty: 3 mos Replaceable reagent modules for ammonium, chloride, and nitrate sensors Weight 3.60 kg (7.90 lbs) *Typically 90 days at 20C at 15-minute logging interval; temperature/conductivity, pH/ORP, DO, total algae, and turbidity sensors installed with central wiper that rotates once per logging interval on EXO3. Battery life is heavily dependent on sensor configuration. Ammonium (freshwater only) Ammonium Sensor Ammonia with pH sensor SKU: 599710 0 to 200 mg/L (0 to 30C) ±10% of reading or 2 mg/L-N, w.i.g. T63<30 sec 0.01 mg/L Barometric Pressure Integral Barometer 375 to 825 mmHg ±1.5 mmHg from 0 to 50°C - 0.1 mmHg Blue-green Algae, Phycocyanin Total Algae Sensor SKU: 599102-01 0 to 100 μg/L; 0 to 100 RFU; Linearity: R2 >0.999 for serial dilution of Rhodamine WT solution from 0 to 100 μg/mL BGA-PC equivalents T63<2 sec 0.01 μg/L; 0.01 RFU Blue-green Algae, Phycoerythrin Total Algae Sensor SKU: 599103-01 0 to 280 μg/L; 0 to 100 RFU; Linearity: R2 >0.999 for serial dilution of Rhodamine WT solution from 0 to 280 μg/mL BGA-PE equivalents T63<2 sec 0.01 μg/L; 0.01 RFU Chloride (freshwater only) Chloride Sensor SKU: 599711 0 to 18000 mg/L-Cl (0 to 30C) ±15% of reading or 5 mg/L-Cl, w.i.g. T63<30 sec 0.01 mg/L Chlorophyll Total Algae Sensor SKU: 599102-01, 599103-01 0 to 400 μg/L Chl; 0 to 100 RFU Linearity: R2 >0.999 for serial dilution of Rhodamine WT solution from 0 to 400 μg/L Chl a equivalents T63<2 sec 0.01 μg/L Chl; 0.01 RFU Conductivity1 Conductivity / Temperature Sensor SKU: 599870 0 to 200 mS/cm 0 to 100: ±0.5% of reading or 0.001 mS/cm, w.i.g.; 100 to 200: ±1% of reading T63<2 sec 0.0001 to 0.01 mS/cm (range dependent) Depth - 10 m Integral, Non-vented Depth Sensor3 0 to 10 m (0 to 33 ft) ±0.04% FS (±0.004 m or ±0.013 ft) T63<2 sec 0.001 m (0.001 ft) (auto-ranging) Depth - 100 m Integral, Non-vented Depth Sensor3 0 to 100 m (0 to 328 ft) ±0.04% FS (±0.04 m or ±0.13 ft) T63<2 sec 0.001 m (0.001 ft) (auto-ranging) Depth - 250 m Integral, Non-vented Depth Sensor3 0 to 250 m (0 to 820 ft) ±0.04% FS (±0.10 m or ±0.33 ft) T63<2 sec 0.001 m (0.001 ft) (auto-ranging) Dissolved Oxygen, % air saturation Optical Dissolved Oxygen Sensor SKU: 599100-01 0 to 500% air saturation 0 to 200%: ±1% of reading or 1% saturation, w.i.g.; 200 to 500%: ±5% of reading 4 T63<5 sec5 0.1% air saturation Dissolved Oxygen, mg/L Optical Dissolved Oxygen Sensor SKU: 599100-01 0 to 50 mg/L 0 to 20 mg/L: ±0.1 mg/L or 1% of reading, w.i.g.; 20 to 50 mg/L: ±5% of reading 4 T63<5 sec5 0.01 mg/L fDOM (CDOM) fDOM Sensor SKU: 599104-01 0 to 300 ppb Quinine Sulfate equivalents (QSU) Linearity: R2 > 0.999 for serial dilution of 300 ppb QS solution Detection Limit: 0.07 ppb QSU T63<2 sec 0.01 ppb QSU Level, Vented - 10 m Integral Vented Level Sensor 0 to 10 m (0 to 33 ft) ±0.03% FS (±0.003 m or ±0.010 ft) T63<2 sec 0.001 m (0.001 ft) Nitrate (freshwater only) Nitrate Sensor SKU: 599709 0 to 200 mg/L-N (0 to 30C) ±10% of reading or 2 mg/L-N, w.i.g. T63<30 sec 0.01 mg/L pH pH Sensor SKU:599701 guarded, 599702 unguarded pH/ORP Sensor SKU:599705 guarded, 599706 unguarded 0 to 14 units ±0.1 pH units within ±10C of calibration temp; ±0.2 pH units for entire temp range7 T63<3 sec8 0.01 units ORP pH/ORP Sensor SKU:599705 guarded, 599706 unguarded -999 to 999 mV ±20 mV in Redox standard solution T63<5 sec6 0.1 mV Temperature Conductivity / Temperature Sensor SKU: 599870 -5 to 35°C 35 to 50°C ±0.01°C2 ±0.05°C2 T63<1 sec 0.001 °C Turbidity9 Turbidity Sensor SKU: 599101-01 0 to 4000 FNU, NTU 0 to 999 FNU: 0.3 FNU or ±2% of reading, w.i.g.; 1000 to 4000 FNU: ±5% of reading10 T63<2 sec 0 to 999 = 0.01 FNU, NTU; 1000 to 4000 = 0.1 FNU, NTU Salinity Calculated from Conductivity and Temperature11 0 to 70 ppt ±1.0% of reading or 0.1 ppt, w.i.g. T63<2 sec 0.01 ppt Specific Conductance Calculated from Conductivity and Temperature11 0 to 200 mS/cm ±0.5% of reading or .001 mS/cm, w.i.g. - 0.001, 0.01, 0.1 mS/cm (auto-scaling) Total Dissolved Solids (TDS) Calculated from Conductivity and Temperature11 0 to 100,000 mg/L Cal constant range 0.30 to 1.00 (0.64 default) Not Specified - Variable Total Suspended Solids (TSS) Calculated from Turbidity and user reference samples 0 to 1500 mg/L Not specified T63<2 sec Variable **Specifications indicate typical performance and are subject to change. All sensors have a depth rating to 250 m (820 ft), except shallow and medium depth sensors, ammonium, chloride, and nitrate. Accuracy specification is attained immediately following calibration under controlled and stable environmental conditions. Performance in the natural environment may vary from quoted specification. w.i.g. = whichever is greater EXO sensors are not compatible with YSI 6-Series sondes, sensors, or handheld. 1Outputs of specific conductance (conductivity corrected to 25C) and total dissolved solids are also provided. See Calculated Parameters and footnote 11. 2 Temperature accuracy traceable to NIST standards 3Accuracy specifications apply to conductivity levels of 0 to 100,000 μS/cm. 4 Relative to calibration gases 5 When transferred from air-saturated water to stirred deaerated water 6 When transferred from water-saturated air to Zobell solution 7Within the environmental pH range of pH 4 to pH 10. 8On transfer from water-saturated air to rapidly stirred air-saturated water at a specific conductance of 800 μS/cm at 20C; T63<5 seconds on transfer from water-saturated air to slowly-stirred air-saturated water. 9 Calibration: 1-, 2-, or 3-point, user-selectable 10 Performance based on 3-point calibration done with YSI AMCO-AEPA standards of 0, 124, and 1010 FNU. The same type of standard must be used for all calibration points. 11 Values are automatically calculated from conductivity according to algorithms found in Standard Methods for the Examination of Water and Wastewater (Ed. 1989). Xenoy is a trademark of SABIC Innovative Plastics IP BV. EXO Bluetooth modules comply with Part 15C of FCC Rules and have FCC, CE Mark and C-tick approval. Bluetooth-type apprvals and regulations can be country specific. Check local laws and regulations to insure that the use of wireless products purchased from Xylem are in full compliance.
Description

Multiparameter Water Quality Sonde with 5 sensor ports (including a central wiper port), optional depth sensor, and battery compartment

EXO Multiparameter Sondes — the best-in-class platform for the highest quality data. EXO's dynamic range of smart sensors provide comprehensive multiparameter water quality data while SmartQC ensures proper calibrations and top sensor performance. You can be confident in your extended deployments thanks to EXO's tough materials and unmatched anti-fouling technology.

Overview
Kor Software is an accessible, feature-rich platform for managing EXO instrumentation and water quality data. Easily calibrate sensors, set up long-term deployments, and ensure equipment is operating at peak performance!

EXO3-Product-Page-Banner.jpg

The parameters you need, without the features you don't!

Offering the greatest value of any sonde available on the market, EXO3 combines the maneuverability of the EXO1 with the powerful antifouling wiper of the EXO2.


EXO3 is a purpose-built sonde for monitoring major water quality parameters, including: pH, conductivity, temperature, turbidity, and dissolved oxygen.

Key Benefits

exo multiparameter sonde data datasonde


Highest Data Quality
Onboard monitoring systems verify sensor operation


Multiparameter Monitoring
5 universal ports for allow for any combination of smart sensors or the central wiper

exo anti-fouling antifouling


Industry-leading Anti-fouling
Best-in-class wiper technology


Titanium Components
The toughest grade parts guarantee operation well into the future 


Seamless Integration
EXO can plug-and-play into marine, estuarine, freshwater, and groundwater monitoring systems

 

Additional Benefits Only from EXO3

Maintenance Special
The best priced, highest-quality sonde for
baseline water quality monitoring.


Flexibility to switch from continuous monitoring to
spot sampling with a lighter, shorter form factor.

YSI Integrated Systems
Integral SDI-12 communications makes it ideal for existing data collection 
platforms and installations. (Including replacement of 6-Series sondes.)

 

Smart Sondes and Sensors
EXO is an extremely versatile instrument, allowing the user to automatically configure a sonde with different sensors for different applications in minutes

Smart Sensor Options:
• Conductivity/Temperature (wiped and non-wiped)
• Dissolved Oxygen
• fDOM
• ISEs (AmmoniumChloride, and Nitrate)
• pH (guarded and unguarded)
• pH & ORP (guarded and unguarded)
• NitraLED (UV Nitrate)
• Rhodamine
• Total Algae (Chlorophyll + Phycocyanin and Phycoerythrin)
• Turbidity

Other Available Parameters
• Absolute Pressure
• Ammonia
• Depth
• DO% Local
• Guage Pressure
• nLF Conductivity
• PAR
• Resistivity
• Salinity
• Specific Conductivity
• Total Dissolved Solids
• Total Suspended Solids
• Water Density

Accuracy
EXO sondes and sensors are tested in a variety of rigorous field conditions as well as lab conditions to ensure accuracy and response times.

Monitor without Interruption
No matter which EXO sensors users select, other features of the smart sensor design make them rugged and durable:
• Wet-mateable connectors resist corrosion
• Isolated components prevent short circuits
• Welded housings and double o-rings prevent leaks
• High-impact plastic and titanium resists breaking
• Built-in anti-fouling systems protect data integrity
• Low power consumption extends underwater deployments

Monitoring Made Mobile
EXO makes it easy to view data in the field. The EXO Handheld offers a dedicated, streamlined interface to EXO sondes. EXO GO uses Bluetooth to connect any Windows OS device to a submerged EXO sonde.

Other EXO Sonde Options
• EXO3s Sonde offers the same features as the EXO3, but without the battery compartment
• EXO1 Sonde (4 ports) — also available without battery compartment
• EXO2 Sonde (7 ports including Central Wiper port) — also available without battery compartment

 

More detail about HSA ASIA SDN BHD
HSA ASIA SDN BHD
HSA ASIA SDN BHD Measuring Instruments Selangor | Flow Meter Supply Kuala Lumpur (KL) | Water Analytical Instruments Supplier Malaysia ~ HSA ASIA SDN BHD
Contact Us flagMalaysia