Behringer-EURODESK PMP2000

Behringer PMP2000 Specifications

• Type: XLR, electronically balanced, discrete input circuit
• Frequency Response: <10 Hz-100 kHz (-1 dB), <10Hz- >200 kHz (-3 dB)
• Gain: +33 dB, +8 dB with pad
• Max Input Level: +12 dBu @ +12 dB gain
• Impedance: approx. 2.2 k ohms balanced/ 1.1 k ohms unbalanced
• Signal-to-Noise Ratio: 110 dB/ 114 dB A-weighted (-11 dBu IN @ +33 dB gain)

• Distortion (THD+N): 0.001% / 0.008% A-weighted
• Mono Line Inputs
  • Type: 1/4 inch TRS connectors, balanced
  • Impedance: approx 80k ohms balanced, 40k ohms unbalanced
  • Max Input Level: 30 dBu
• Stereo Line Inputs
  • Type: 1/4 inch TRS connectors, unbalanced
  • Impedance: approx. 40k ohms unbalanced
  • Max Input Level: +28 dBu
• Equalizer
  • Low: 60 Hz / +/- 15 dB
  • Mid: 700 Hz-8kHz/ +/- 15 dB
  • High: 6 kHz / +/- 15 dB
• Preamp Outputs left/mono & right
  • Type: 1/4 inch TRS connector, unbalanced
  • Impedance: approx 1.5k ohms
  • Max Output Level: +21 dBu
• Monitor Output
  • Type: 1/4 inch TRS connectors, unbalanced
  • Impedance: 1.5k ohms
  • Max Output Level: +21 dBu
• Power Amp Inputs
  • Type: 1/4 inch TRS connectors, unbalanced
  • Impedance: approx 47k ohms
  • Max Input Level: +21 dBu
• Loudspeaker Outputs
  • Type: Professional speaker connectors (compatible to Neutrik Speakon)
  • Load Impedance
    • Left/monitor: 4/8/16 ohms
    • Right/mono main: 4/8/16 ohms
    • Bridge: 8-16 ohms
• DSP
  • Converter: 24-bit Texas Instruments, 24-bit Sigma-Delta, 64/128-times oversampling
  • Sampling Rate: 40 kHz
• Amplifier (Power Amp Output)
  • Power @ 4 ohms: 250 w
  • Power @ 8 ohms: 165 w
  • Power @ 8 ohms (Bridge): 500 w
• Power Supply
  • Mains Voltage: 120 V~, 60 Hz
  • Power Consumption: max 1 kW
  • Fuse: T 10 A H 250V
  • Mains Connector: Standard IEC receptacle
• Physical/Weight
  • Dimensions: approx. 11 x 18 1/8 x 10 5/8 inches
  • Weight: 30.9 lbs