Properties: Fluid paste that hardens by the action of a catalyst, a flexible, soft material is obtained , non-stick and resistant to a wide range of temperatures. How to use: The surface of the original must be clean and free of residues, pour into a clean container 100 g of component A and 10 g of component B and mix well until component B is completely dispersed in the base.Do not mix for a prolonged period of time or expose the mixture to Ta higher than 35ºC. It is preferable to always mix small quantities to ensure a good mixture of component A and component B .
The catalyst material will cure in a period of 18-24 ha at an ambient temperature of 22-24 ° C, forming a flexible rubber mold that can be easily separated from the original. Application: Manufacture of silicone molds, suitable for food, freezing and cooking. Observations: It is recommended to eliminate trapped air by placing the mixture in a vacuum chamber, allowing it to expand completely and then collapse. Keep the mixture for 1-2 more minutes in the vacuum chamber and then proceed to examine it; If there are no air bubbles, you can use it.When the mixture is deaerated in vacuum, a volume increase of 3 to 5 times will occur, so it is advisable to use a sufficiently large container.
If you do not have vacuum deaeration equipment, you can minimize air occlusions by mixing a small amount of component A and component B and then using a brush to apply a layer on the original of 1 or 2 mm. Maintain at room temperature until the surface is free of bubbles and the layer has started to cure. Mix another quantity of component A and component B and pour the mixture as soon as possible over the original, avoiding air occlusions. Elaborations: Exact reproductions of any type of figure to fill with mousse, chocolates, candies, gelatins, ice cream, etc.
Hong Yap Trading CompanyBakery Ingredients Supplier Penang, Cake Decoration Wholesaler Malaysia, Baking Supplies George Town ~ Hong Yap Trading Company
Malaysia
