Description
Alluris TTT-300 Torque Tester
Features
-
Quick check of torque tools >> for manual and motorized torque drivers.
-
Automatic capture of two peaks >> for testing peak at click point and the following maximum.
-
Limit value monitoring >> with pass/fail detection for both peak values.
-
Calibration of torque tools according to ISO 6789 >> for manual screwdrivers and torque wrenches.
Description
Digital TTT-300 series Torque Tool Testers are designed to measure the triggering torque (click point) and the second maximum value of torque tools, for fast and easy manual inspection in the workshop.
The device has an internal memory with statistic function and a USB interface. Results can be transmitted directly to PC applications (e.g. CAQ systems) with a footswitch.
The included software TTT_Certify enables to utilize the tester for calibration of torque tools according to DIN EN ISO 6789. As result you receive a calibration certificate as PDF printout according to the standard.
The torque tester is overload protected. The rugged steel case may be firmly screwed on table tops (thickness up to 30mm).
Technical Specifications
|
|
Order No. |
|
TTT-300B2 |
TTT-300B5 |
TTT-300C1 |
TTT-300C2 |
TTT-300C5 |
|
Measuring Range M(n) |
Nm |
0.2 - 2 |
0.5 - 5 |
1 - 10 |
2.5 - 25 |
5 - 50 |
|
Resolution |
Nm |
0.002 |
0.005 |
0.01 |
0.02 |
0.05 |
|
Accuracy |
% |
+/- 0.5 |
|
|
Class 1 (DKD-R 10-8) |
|
Display range |
% |
120 of M(n) |
|
Display |
Type |
LCD, 5-digit, 29 mm high |
|
Interface |
USB |
USB 2.0 data communication and supply |
|
Hirose |
Limit/overload signals, digital I/O's |
|
Software |
TTT_Certify |
Quick check or creation of calibration certificates |
|
Supply |
Type |
Internal solar cell with storage capacitor / via USB |
|
Temperature (operation) |
°C |
0...40 |
|
Housing |
L xW xH |
280 x 147 x 79 |
|
Weight (kg) |
5.00 |
|
Fixing |
On table top up to 30 mm thick by means of threaded bolt and knurled nut |
|
Protection class (EN 60529) |
Cable not plugged |
IP42 (protection against falling dripping water) |
|
Operating mode |
Standard |
Display of current value |
|
Peak (click + max) |
Peak value display (drag pointer function) |
|
Quickcheck |
Five follow-up measurements with averaging |
|
Limit |
Two separately selectable limits with upper and lower limit value |
Downloads
More detail about Muser Apac Sdn Bhd
Malaysia
