Robust handheld device for accurate ferrite content measurement, directly on site
Simple operation via intuitive menu
Large, easy-to-read display with extensive functions
Locking keyboard to safeguard your settings
Units can be switched between WRC-FN (ferrite number), Fe % (ferrite percent) and α-martensite % (forming martensite)
Measurements according to the Basler standard
After applying the probe, the measured value is automatically displayed and saved in the instrument
Free-running display continuously shows measured values when probe is applied
Various probes available for reliable ferrite content measurement, even in hard-to-reach places
Data storage for up to 20,000 measured values and 100 applications
Data transfer via Bluetooth or cable
Easy evaluation of the measured values by Fischer's own software, PC-DATEX and FISCHER DataCenter
Just one calibration required for the entire measuring range
Large selection of calibration standards for your measuring range
Available as a fully functional module for the stationary measurement instrument MMS PC2
Applications
Non-destructively (NDT) measure the ferrite content in the range of 0.1 – 80 % Fe or 0.1 – 110 FN (magnetic induction method)
Ferrite content measurements on e.g. austenitic cladding or welds in stainless steel pipes, containers, boilers or other products made of austenitic or duplex steels
Measuring the ferrite content has never been so easy
Sometimes, knowing the exact ferrite content is essential. Especially wherever austenitic steels and duplex steels have to withstand heat, aggressive chemicals and/or high pressure. If the ferrite content is too low, for example in the area of weld seams, this can lead to a loss in strength. On the other hand, too-high ferrite content reduces corrosion resistance, toughness and ductility. But if you check the ferrite content with the FERITSCOPE® FMP30, you know for sure.
This handy instrument lets you measure the ferrite content anytime, anywhere – it’s fast, precise and non-destructive. The advantages of the robust handheld device come to the fore when used in chemical plants, energy plants and process engineering plants. The wide variety of Fischer probes makes it easy for you to measure the ferrite content, even if the spot is hard to reach. Just apply the probe; the FERITSCOPE® FMP30 does the rest.More detail about LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.Measuring Equipment Wholesaler Malaysia, Coating Instruments Supplier Penang, Hardware Tools Supply Kuala Lumpur (KL), Selangor ~ LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
