SCM Series

SCM Series

Category: Network Converters Available
For more information, visit our official website at kcssales.com.my

Description

Communication Converters

The SCM series communication converters are available in various types, to offer easy signal conversion and flexibility for building diverse systems. Wireless, USB-RS485, RS232C-RS485, USB-Serial, and temperature transmitters are available.



Main features


SCM-WF48 (Wireless Communication Converters)

  • Convert RS485/USB signals to Wi-Fi signals for wireless transmission up to 100m
  • Compact size (W45 × H25 × L76.3mm, without antenna)
  • Built-in surge protection circuit and reverse polarity protection circuits
  • Supports Access Point (AP) mode and Station (STA) modes
  • Various mounting methods (DIN rail, screw mount)


SCM-US48I (USB-RS485 Communication Converters)

  • Convert and transmit signals between USB and RS485 devices (up to 1.2km)
  • RS485 transceiver provides electrical insulation (2500 Vrms) between USB and RS485
  • Built-in surge protection circuit
  • Bus powered by USB host controller
  • Ferrite bead USB 2.0 AB type cable with noise suppression provided
  • USB 1.1 and USB 2.0 host controller compatible


SCM-38I (RS232C-RS485 Communication Converters)

  • Convert and transmit signals between RS232C and RS485 devices (up to 1.2km)
  • Built-in surge protection circuit
  • Isolated signal lines (RS232C, RS485)
  • Tx Enabled signal


SCM-US/SCM-USP/SCM-SFL (USB-Serial Communication Converters)

※ 4-pin connector type model have been added to the lineup

  • Easy connection between devices and PCs
  • Ferrite bead USB cable with noise suppression
  • Built-in protection circuits
  • Non-isolated type
  • LED operation indicator for data transmission and power
  • USB 1.1 and USB 2.0 host controller compatible
  • Designed specifically for Autonics products with PC loader ports


SCM-USU2I (2-Channel USB Temperature Data Loggers)

  • Transmit 2 channels of real-time temperature data to PCs
  • Record and monitor temperature using DAQMaster (comprehensive device management software)
  • USB-powered device with USB communication interface (Modbus RTU)
  • Supports various input types (thermocouple, RTD, mA, V) and different sensors can be assigned to each channel
  • 50ms high-speed sampling rate (simultaneous 2-channel sampling)
  • Easy wiring with plug/socket type terminal
  • Compact, space-saving design (W45 × H25.3 × L75mm)
  • DIN rail and screw mount methods

More detail about KCS SALES AND MARKETING SDN BHD
KCS SALES AND MARKETING SDN BHD
KCS SALES AND MARKETING SDN BHD Autonics Distributor Malaysia, Industrial Automation, Factory Automation Perak, Electrical Instruments Wholesaler, Industrial Supplies ~ KCS SALES AND MARKETING SDN BHD
Contact Us flagMalaysia