Descriptions:
100% High Quality OEM Power Window Switch
Made Using Quality ABS and chips
Production Under ISO9001/TS16949 Standard
Plug & Play
Installation Guide:
If you have never removed or installed this switch please don't pay to have it done. It is an easy 5 minute job. Carefully pry up the plastic switch cover or bezel, the switch is attached to it with screws and your door wiring is plugged into the switch with a tabbed gang wire clip. Pull out the clip without tugging on the wiring. You may need to depress a tab with a small screwdriver while doing this. Plug in new switch and test. Swap the cover onto the new switch and drop back in the door. Done!
Malaysia
