SNAP-ON Enhanced Multimeter TRMS-Color / Model: EEDM525F: Top Choice in Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Description

Capacitance	Yes
RPM	EEDMRPMG (optional)
Battery Life (Continuous Use), hours	10
Low Pass Filter (LPF)	Yes
Adjustable Trigger Level	No
Temperature	EEDMTEMP-1 (optional)
AC Volts	750
Basic DC Accuracy, %	0.005
Power Supply	9 V Lithium Battery (purchased locally)
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	4.7 x 7.7 x 1.6
Noise Reduction Circuit	No
mS Pulse Width	No
CAT Rating	CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC
Backlight	Always On
Auto Shut-off	Yes
Test Leads	EEDMLEADSET
Certificate of Calibration Model	EEDM525FCRT
DC Amps	10
UL® Listed	cULus 61010-1
Glitch Capture	No
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	40M
Data Hold	Yes
Nylon Pouch, Zipper Case	EEDM5F-POUCH, EEDM5F-CC (optional)
Auto Range	Yes
Duty/Dwell	Duty Only
True RMS (Root Mean Square)	Yes
AC Amps	10
Display Count	4,000 Color
Fuses	EEDMFUSE-7, EEDMFUSE-8
Blown Fuse Identifier	Yes
Comp. Output (USB)	No
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	EEDM5F-DOOR
Color Screen	Yes
Frequency	Yes

Features

Measures ohms, AC/DC volts, true-RMS AC, AC/DC amps, Hz frequency, capacitance and more to cover most automotive electrical needs
Larger 4'' color display for easy reading and quick identification of symbols
(note: The tradeoff for the large color display- unit is not recommended for use in sunlight)
CAT-III 1,000 V AC and CAT-IV 600 V AC hybrid safety ratings mean its safe to use on hybrids
Convenient test lead storage wrap with retention strap
Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
Button Functions: Auto or manual range, record mode, hold/lock, duty cycle, low pass filter and second functions
7-year warranty
COLOR LCD 4,000 count, 41 segment bar graph
Record mode stores min/max readings
Ability to manually select range or allow auto ranging
Select continuity buzzer or diode test (displays yellow)
OHMS measures resistance in plug wires, coils, sensors and continuity
DC mV 40 mV range w/0.01 mV high-resolution accurate low volt readings
DC V Measure up to 1,000 V, test circuits and sensors
TRUE RMS (AC) Root Mean Squared vs avg rectified, use for ABS wheel sensors
Hz/ DUTY CYLE Measure in percentage the on time of sensors
REL Relative mode factors out lead resistance for improved low-ohm measures or differential
HOLD Lock the reading in hard to reach location for later reference
LPF Activate Low Pass Filter to reduce AC noise
AC/DC Current Measure parasitic draw from battery with ignition off
Hz Frequency Measure the frequency of sensors and signals
CAP Measure the capacitance of condensers or capacitors
TEMP With *optional EEDMTEMP-1 K-type adapter measure °F and °C

Internal Fuse Test:

Before you call the 800 number
Set unit to diode test with FUNCTION button
Plug the black test lead into red “VΩ” input
Touch the prod end of black lead red “A” input
If the meter reads “OL” fuse is blown, replace
If there is a reading other than “OL” fuse is OK
Technical Support: 888-382-6522

More detail about ALLIANCE SUPPLIES SDN BHD