SNAP-ON Basic Multimeter Daylight CERT / Model: EEDM504FCRT: Top Choice in Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Description

Capacitance	Yes
RPM	EEDMRPMG (opt.)
Low Pass Filter (LPF)	No
Case or Zipper Pouch	EEDM504B4
Replacement Fuses	EEDM5O4B1 EEDM504B2
Adjustable Trigger Level	No
Temperature	EEDM506C (opt.)
AC Volts	750
Basic DC Accuracy, %	0.50
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	7-3/4 x 3-3/4 x 1-1/2
Noise Reduction Circuit	No
mS Pulse Width	No
CAT Rating	CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC
Backlight	No
Auto Shut-off	Yes
Test Leads	EEDM504B3
Certificate of Calibration Model	EEDM504DCRTâ€
DC Amps	10
UL® Listed	cULus 61010-1
Glitch Capture	No
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	40M
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Duty Only
True RMS (Root Mean Square)	No
AC Amps	10
Display Count	4,000
Blown Fuse Identifier	Yes
Comp. Output (USB)	No
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	Yes
Color Screen	No
Frequency	Yes

Features

LCD Display - 4,000 count with 42-segment bar graph
REC (Record Mode) - Store minimum and maximum readings over a measurement period
AC/DC—Manually select AC or DC measurement function
Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on Ohm function
RANGE—Manually select the appropriate range
LCD Display—4,000 count with 42 segment bar graph
Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on ohm function
HIGH RESOLUTION DCmV RANGE—Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements
ACV (AC Volts)—Measure the voltage of ABS wheel sensors
DCV (DC Volts)—Measure the voltage of circuits and sensors
Hz/Duty (Duty Cycle)—Measure in percent the ON time of sensors or other devices
REL (Relative Mode)—Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements
HOLD—Lock the reading on the display for hard to read locations for future reference
OHMS/RESISTANCE—Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
AC/DC Current Functions (Amps)—Measure the parasitic draw from the battery with ignition off
Hz (FREQUENCY)—Measure the frequency of sensors and signals
CAP (Capacitance)—Measure the capacitance of condensers or capacitors found in today's hybrid automobiles
TILT STAND—Is built into the instrument housing
SEPARATE FUSE/BATTERY COMPARTMENT—Is easily removed for battery/fuse replacement
Fuses are labeled with replacement number
Seven-year limited warranty
Technical and Service Hot Line: 1-888-382-6522
Manually select AC or DC measurement function
AC/DC Current functions: measure the parasitic draw from the battery with ignition off

More detail about ALLIANCE SUPPLIES SDN BHD