SNAP-ON 12 V Digital Display Circuit Tester with USB Plug / Model: EECT402USB: Top Choice in Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Description

Voltage	6 & 12 V DC
Operating Temperature	0–120 °F (-18–49 °C)
Replacement Cord Assembly	EECTCORD402USB
Replacement LED and Spring Assembly	EECT402USB-LCD
Computer Safe	Yes, <10 mA (Do not use on airbags)
Replacement Clip	NA (USB Plug included on replacement cord)
Red LED	Power Connection Indicator
Handle Size/Color	Medium Instinct®/Clear
Terminal End	USB Plug (EECT402USB-1, 12 V CLA adaptor included)
Polarity	Bi-Directional with Color LED, Red and Green indicators
Green LED	Ground Connection Indicator
Cord Type	Coiled Flexible Rubber
Country Of Origin	KOR
Warranty	1 Year (field repairable)
Surge Protected	Surge and high DC voltage
Resolution	0.1 V DC
Accuracy	±0.3 Volt
Outside Wire Diameter, inches (mm)	.3 (7.6)
Cord Color	Black
Weight, lb (kg)	0.5 (0.22)
Overall Handle and Shank Length, inches (cm)	8-1/4 (20.9)
Range	0–19.9 V DC
Stainless Steel Shank Length, inches (cm)	3-1/2 (8.9)
Cord Length, ft (m) – gauge	13 (3.6) – 18
Display	LCD w/Backlight

Features

Detects DC voltage on newer autos, trucks, motorcycles and more with a USB port
0-19.9 V DC range
USB plug allows measurement of DC voltage, ground and open circuits without changing polarity
No clamp connection to vehicle battery for quicker diagnosis
Backlit daylight readable LCD digital display has LED illumination in green for ground or red for power
Leaves one hand free to jiggle a wire, replace a fuse or operate a switch
3-1/2'' stainless steel corrosion free shank
Patented Instinct® clear handle for visibility, style and comfort
Traditional 12 V CLA adaptor is included for older vehicles (EECT402USB-1)
18 Gauge coil cord stretches to 13'
START: Insert the plug end into the vehicles USB port
OPEN: White backlight will turn on, the red and green LED’s flash, display will read 0.0 V—red and green lights continue to flash until a good ground or voltage reading at the tip is found
POWER: Touch the probe to a terminal, wire or switch, the Red LED illuminates and the LCD will display the measured circuit voltage
GROUND: Touch the probe to a terminal, wire or chassis, the Green LED illuminates and the LCD will display “gnd.v” for an acceptable ground or a reading for an unacceptable ground
Technical Support 888-382-6522