PROSTAT - PAS-853BRM Digital Surface Resistance Test Kit: Top Choice in Melaka, Malaysia, Ayer Keroh Carlssoon Technologies (Malaysia) Sdn Bhd

Description

PROSTAT - PAS-853BRM Digital Surface Resistance Test Kit
Brand: Prostat
Model: PAS-853BRM

WIDE RANGE SURFACE RESISTANCE OHM METER KIT

Product Features:

Surface Resistance Kit from 0.01 ohm to 9.99x10¹² ohms
Nominal Full Range Tolerance Averages <±5%
Fully Automatic Resistance Range, Test Voltage and Electrification Period control
Determines if a surface is Dissipative, Conductive, or Insulative
Measures resistance point-to-point(Rtt) and point-to-ground (Rtg)
Measures resistance of Static Control Floors, ESD Work Surfaces and Packaging Material
Conforms to all ESD Association Standards for Resistive Characterization
Includes 2 each Conductive Rubber Electrodes
Packaged in a hard shell Carrying Case
Certificate of Calibration Traceable to NIST included

Product Overview:

Wide Range Resistance Kit
The PAS-853BRM Digital Surface Resistance Test Kit is the ideal kit for the ESD Plant Auditor. It includes the PAS-853B Wide Range Ohmmeter with 2 each PRS-801W 5 lbs Conductive Rubber Electrodes.
Designed to Support ESD TR53
The PAS-853B is a wide range ohmmeter that measures accurately from 0.01 Ω to 9.99 x 10¹² Ω. The kit is designed to measure resistance point-to-point (Rtt) or surface to ground (Rtg), and meets audit requirements of ESD TR53, while supporting ANSI/ESD S20.20 program standard and periodic verification requirements.
Variable & Constant Test Voltages

<10 Volts Variable from 0.01 to 9.9x10³ ohms
10 Volts (±<5% Constant Voltage) from 1.0x10⁴ to 9.99x10⁵ ohms
100 Volts (±<2% Constant Voltage) from 1.0x10⁶ to 9.99x10¹² ohms

A Fast and Reliable Resistance Meter
The PAS-853B is a lightweight meter with a built-in electrification period of 3 seconds for measurements from 1.00E-2 Ω to 9.99E+5 Ω and 8 seconds from 1.00E+6 Ω to <1.00E+12 Ω, making it a quick and easy way to measure more surfaces throughout your day.
Fully Automatic for Resistance and Test Voltage
The PAS-853B will determine the resistance range and test voltage automatically when you make measurements. After the minimum electrification period, the display will freeze an accurate measurement for 10 seconds. Alternatively, the meter has the option of measuring in Continuous mode, which will continue to measure until Reset is pressed.
Conductive Probes for Surface Resistance
The PRS-801W are conductive probes used for surface resistance measurements. Measuring under 500 ohms each a clean plate, the 5lb electrodes meet the requirements of ANSI/ESD S4.1 and ANSI/ESD S7.1 for resistance, diameter, weight and durometer. .
Complies to ANSI/ESD Standards and Test Methods
The PAS-853BRM is ideal for making measurements in accordance with test procedures in the following:

Floors - ANSI/ESD S7.1- Resistive Characterization of Materials Floor Materials
Worksurfaces - ANSI/ESD S4.1 Worksurfaces
Compliance Verification - ESD TR53 - Resistance Measurements
Floor/Footwear - ANSI/ESD STM97.1 - Floor Materials and Footwear- Resistance Measurement in Combination with a Person
Garments - ANSI/ESD STM2.1 Garments
Seating - ANSI/ESD STM12.1- Seating - Resistive Measurement

Technical Specification:

General Specifications

Characteristics
Measuring Range	0.01 Ω to 9.99 x 10¹² Ω
Measurement Modes	Auto, Manual and Continuous
Display	69.8 mm x 30.5 mm (2.75” x 1.20'') 6 digit - 7 segment TN display
Battery Power	One 9V Alkaline Transistor Battery
Battery Life	> 50 hours
Operating Temperature	18°C to 32°C (65°F to 90°F)
Operating Relative Humidity	10% – 60%, non-condensing
Operating Altitude	2000 m
Dimensions (WxHxD	109 mm x 184 mm x 36 mm 4.30 in x 7.25 in x 1.40 in
Weight	375 g (13.2 oz)
Case Material	ABS Plastic with Rubber Side Grips
Color	Grey
Warranty	1 Year Limited Warranty

Resistance Measurement Specifications

Measuring Range	Accuracy¹
0.1E-1 to 1.99E+0Ω	±10%, ±2 Counts
2.00E+0 to 9.99E+9Ω	±2%, ±2 Counts
1.00E+10 to 9.99E+10Ω	±5%, ±2 Counts
1.00E+11 to 9.99E+11Ω	±10%, ±2 Counts
1.00E+12 to 9.99E+12Ω	±20%, ±4 Counts

¹ Tolerance and accuracy measurements were conducted under controlled conditions with close tolerance reference resistors.

Test Voltages

Test Voltage	Constant Voltage	Auto Mode	Manual Operation
<10V	Variable (Based on resistance Load)	Functional within range 0.01 Ω to <1.0E+4 Ω	Resistance Range: 0.01E-1 to 9.99E+9 Ω
10V	Constant Voltage (Under Load)	Functional within range 1.0E+4 Ω to <1.0E+6 Ω	Resistance Range: 0.9E+4 to 9.99E+10 Ω
100V	Constant Voltage (Under Load)	Functional within range 1.0E+6 Ω to <1.0E+13 Ω	Resistance Range: 0.90E6 to 9.99E12 Ω

¹ at 23°C (73.5°F) and 30% RH

Measurement Modes

Mode	Resistance Range	Test Voltage
Auto	Automatic	Automatic	@<10V: 0.01 to <1.00E+04 Ω @ 10V: 1.00E+04 to <1.00E+06 Ω @100V: 1.00E+06 to <2.00E+14 Ω
<10V Manual Operation	0.01E-1 to 9.99E9 Ω	0.01 to 9.99V
10V Manual Operation	0.98E4 to 9.99E10 Ω	Nominal, Semi-Constant
100V Manual Operation	0.98E6 to 9.99E12 Ω	100V (±<5V) Constant Voltage

Electrification Period

Resistance Range	Measurement Period	Minimum Electrification Period
1.00E-2 Ω to <1.00E6 Ω	2 seconds	3 seconds
1.00E6 Ω to <1.00E12 Ω	2 seconds	8 seconds
1.00E12 Ω to <1.00E13 Ω	Variable	12 seconds

What’s Included in this Package:

PAS-853B Wide Range Ohmmeter
PAS-853BLR 200 cm Silicone Test Lead - Red
PAS-853BLB 200 cm Silicone Test Lead - Black
PTB-915 Audit Test Bed
PSI-870MAC Alligator Clip (2)
PRS-801BC Bulldog Clip
PAS-853S Test Lead Shunt
PRS-801W 5 lbs Conductive Rubber Electrodes (2)
PAS-105C Carrying Case

More detail about Carlssoon Technologies (Malaysia) Sdn Bhd