Model: SWG-25
Operating range: U-shaped 0-180 °
Set Mold (Outside Diameter mm): 10, 12, 14, 16, 19, 22, 25
Tube wall thickness (mm): 0.8-2.0
Weight: 28 kg
Packing volume: 66 * 43 * 19 cm
The instructions
1. Fix the base first.
2. Select the mold and roll according to the required flex size.
3. When you use it, insert the mold into the lower drilling shaft, then put the bracket on the shaft,
then put the roller on the positioning block and fix it with screws.
4 pull the bracket to the rocker, insert the tube that needs to be bent in the middle of the mold and the roller,
and tighten the nut so that the mold, tube and roller fit. The handle can be pulled.
Description:
This heavy duty manual tube bender is designed to bend metal pipes,
stainless steel pipes, wire pipes and many other pipes from 10mm to 25mm.
It is built with a sturdy steel frame. This compact metal bender is capable of
making different curves in solid round shape.
It is a fast and cheap way to produce angular bends in round tubes.
It can bend up to 2mm wall thickness.
Malaysia
