Bitumen Based Coating Enamel Grade A |
Price: RM 1650/-(EX-FACTORY in Paper Bags. Valid until 30/09/2015) |
Bitumen Based Coating Enamel is a bituminous compound reinforced with inert non-fibrous fillers for hot application. Type 2 a, b and c comply with BS 4147: 1980. It will soften gradually when heated and will change back to solid on cooling.
USAGE
Bitumen Based Coating Enamel is mainly used as anti-corrosion materials for protection of iron and steel pipes for industrial and drinking water.
Characterisitics
|
Grade A
|
Test Methods
|
Filler content by ignition , % by mass |
25 to 35
|
Appendix B
|
Density at 25°C, g/cm³ |
1.2 to 1.4
|
Appendix C
|
Softening point (Ring and Ball ), °C |
100 to 120
|
BS 2000:Part 58
|
Penetration at 25°C, 10-1 mm |
10 to 20
|
Appendix D
|
Flash point (Cleveland Open Cup), min., °C |
250
|
BS 4689
|
Sag, max.,mm |
1.5 - |
Appendix E
|
Bend at 0°C, min., mm |
20
|
Appendix F
|
Impact Disbonded area, max., mm² |
15000 - |
Appendix G
|
Peel, initial and delayed, max., mm 30°C 40°C 50°C 60°C |
3.0 3.0 3.0 3.0 |
Appendix H
|
APPLICATION AND HANDLING