Opening and closing differential pressure (difference between ON and OFF) is 1/2 of SPS-8T . In addition, SPS-8TF1 is available
when a small opening and closing pressure difference is required . In addition to the screw-in type, VCR fittings and ferrule fittings are also available for mounting the pressure-applying part (wetted part). There are pressure resistances of 0.5, 2.0, and 3.0 MPa (5, 20, and 30 kg/cm²) according to the purpose of use.
| Capacitance | |
|---|---|
| AC 250V 5A | DC 100V 1A |
| AC 125V 10A | DC 24V 5A |
 |
|
| Main material | |||
|---|---|---|---|
| Pressure receiving part (wetted part) |
Zinc alloy die casting Stainless steel Brass |
||
| Pressure receiving element (wetted part) |
Multistage bellows (stainless steel, phosphor bronze) |
||
| cover | Polycarbonate | ||
| switch body | Phenolic resin molding | ||
| contact | Silver, gold plating (3μ) | ||
| spring | stainless | ||
| fluid | For fluids such as air, gas, oil, water, and other corrosive liquids and gases, a corrosion-resistant stainless steel pressure-receiving part (wetted part) is available. |
||
| Contact configuration, wiring method | |
|---|---|
 |
|
| Wiring method Terminals 1 (red) and 2 (blue) OFF when pressure rises , ON when pressure drops |
Wiring method Terminals 1 (red) and 3 (black) ON when pressure rises and OFF when pressure drops |
| Standard specifications Unit: MPa (kg/cm²) *Please contact us for stainless steel specifications. | |||||
|---|---|---|---|---|---|
| Lower limit adjustment range (pressure range) | Open/close pressure difference | Tolerance | Pressure resistance | Standard setting | |
| A. | 0 to 0.07 (0 to 0.7) | 0.007 to 0.016 (0.07 to 0.16) | ±0.005 (±0.05) | 0.5 (5) | 0.03-0.04 (0.3-0.4) |
| B. | 0.06 to 0.24 (0.6 to 2.4) | 0.01 to 0.04 (0.1 to 0.4) | ±0.01 (±0.1) | 0.5 (5) | 0.14-0.16 (1.4-1.6) |
| C. | 0.05 to 0.30 (0.5 to 3.0) | 0.015 to 0.03 (0.15 to 0.3) | ±0.015 (±0.15) | 0.5 (5) | 0.20-0.22 (2.0-2.2) |
| D. | 0.18 to 0.7 (1.8 to 7.0) | 0.03 to 0.06 (0.3 to 0.6) | ±0.015 (±0.15) | 2.0 (20) | 0.44-0.48 (4.4-4.8) |
| E. | 0.16 to 1.00 (1.6 to 10) | 0.05 to 0.11 (0.5 to 1.1) | ±0.02 (±0.2) | 2.0 (20) | 0.60-0.67 (6.0-6.7) |
| F. | 0.20 to 1.2 (2.0 to 12) | 0.08 to 0.13 (0.8 to 1.3) | ±0.02 (±0.2) | 2.0 (20) | 0.80-0.90 (8.0-9.0) |
| G. | 0.15 to 0.3 (1.5 to 3.0) | 0.03 to 0.06 (0.3 to 0.6) | ±0.02 (±0.2) | 3.0 (30) | 0.22-0.27 (2.24-2.7) |
| H. | 0.2 to 0.5 (2.0 to 5.0) | 0.04 to 0.09 (0.4 to 0.90) | ±0.02 (±0.2) | 3.0 (30) | 0.35-0.42 (3.5-4.2) |
| I | 0.30 to 0.90 (3.0 to 9.0) | 0.07 to 0.12 (0.7 to 1.2) | ±0.02 (±0.2) | 3.0 (30) | 0.60-0.70 (6.0-7.0) |
| J. | 0.50 to 1.3 (5.0 to 13) | 0.06 to 0.18 (0.6 to 1.8) | ±0.02 (±0.2) | 3.0 (30) | 0.90-1.0 (9.0-10) |
Malaysia
